Home > Products > Industrial Supplies > Other Industrial Supplies

coal  rods extruder is mainly used to press coal, charcoal powder ,coke powder, brown coal powder, coal waste into briquettes with or without a hole in the center with certain strength.

material is squeezed into a solid rods with central hole after high temperature and high pressure process without adding any binder.

The use and maintenance:

Check the rotating parts before starting the flexible and make sure no abnormal noise.

Raw material must be processed, the largest size is less than 3 mm, add water and binder, curing agent, classics agitate retting 24 hours before use.

If feed opening appears jams, use wood or bamboo dredge, avoid using the metal bar.

Characteristics of Charcoal Rods Extruder:

1.coal rods extruder absorbs advanced technology at home and abroad

2. design is good and the quality is reliable

3. Main parts are made of wear-resistant alloy material

4. Charcoal and coal briquettes with high strength and hardness

5. coal rods extruder is of Low consumption, low investment, environmental friendly