Home > Products > Electronics & Electricity > Electronic Instrument > Other Electronic Instrument

Available for more than 95% laptop battery in the market by the connectors below

Function

Charge

Active, pre-charge, constant current and constant voltage are the stages of charging mode. The

initial charging mode depends on the battery voltage, so active and pre-charge don't happen to

every batteries

Discharge  

Constant current discharge for double loads

Test

Testing time is 30 seconds and the purpose is to check both the charging and discharging

 performances

Capacity Correction  

The battery capacity value in the battery management chip will different from the actual capacity

after a battery goes through many recycling cycles. It will affect the use of the battery when the

difference reaches a certain degree. Capacity correction is to deep discharge a battery and then

fully charge, which will correct the capacity value in the battery management chip.

50% Capacity

CD50%: charge firstly, and then discharge to 50% capacity

DC50%: discharge firstly, and then charge to 50% capacity

Online Functions

Tester can be connected with master machine via a USB port. Users can monitor, control and set

parameters via Battery Manager software in the master machine

Monitoring

Battery information can be monitored via three windows

Control

Battery Manager can control slave machine completely. Right-click menu on the battery bar

includes the related commands.

Parameters

1.Weight: 333g

2.Dimensions: 201*99*35mm

3.Input Voltage: AC100-240v with adapter

4.Output Voltage: DC7.2-14.8v

5.Charging current: 3A max

6.Accessories: adapter, usb, cord, cd, connector, cable, jumper

7.With test and charge functions

8.LCD for displaying battery information

9.Battery information can be monitored

10.Tester can be coonected with master machine via a USB cable

Accessories

1).1 * adapter

2).1 * USB cord

3).1 * CD

4).13 * connectors

5).10 * cables

6).10 * jumpers

7).1 * load