20dBm CDMA800+PCS Dual band Signal Repeater
Product Description
Features:
1. Elegant and Compact design
2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
3. 31dB MGC(Manual gain control) 1dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.
4. Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.
5. Low power consumption. |
|
| Model Number |
GCPR-CP20 |
| Electrical specification |
Uplink |
Downlink |
| Frequency Range |
CDMA800 |
824 ~ 849 MHz |
869 ~ 894 MHz |
| PCS |
1850 ~ 1910 MHz |
1930 ~ 1990 MHz |
| Max .Gain |
≥ 65dB |
≥ 70dB |
| Max .Output Power |
≥ 15dBm |
≥ 20dBm |
| Band width (-3dB) |
Wide Band |
| MGC ( Step Attenuation ) |
≥ 31dB / 1dB step |
| Automatic Level Control |
≥ 15dB,auto shut off 31dB after 15dB |
| Gain Flatness |
≤6dB(P-P) |
| Noise Figure |
≤6dB |
| VSWR |
≤1.8 |
| Group Delay |
≤5μs |
| Frequency stability |
≤0.01ppm |
| Spurious Emission & Output inter-modulation |
GSM Meet ETSI TS 151 026 V6.1.0 |
| WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 ) |
| CDMA Meet IS95 & CDMA2000 |
| LED Alarm |
Standard |
| Power LED |
Green light when power on. |
| ALC LED |
Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB,
LED off after 5 second red color |
| Mechanical Specifications |
Standard |
| I /O Port |
N-Female |
| Impedance |
50 ohm |
| Operating Temperature |
-25ºC~+55ºC |
| Environment Conditions |
IP40 |
| Dimensions |
250x220x52mm |
| Weight |
≤ 3.5Kg |
| Power Supply |
Input AC90~264V,output DC12V / 3A |
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
