| Model: | - |
|---|---|
| Brand: | Bill |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Electronic Instrument / Optical Lens & Instrument |
| Label: | co2 Laser Power Supp |
| Price: |
¥1000
/ pc
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:07 Jul, 2014 |
BL100W
The power supply is equipped with a zero current half-bridge soft switching circuit to provide high efficiency and response speed. It is easily compatible with laser tubes of various manufacturers.
With a simple port control, it is applicable to high-level and low-level signals and can start and stop laser by using TTL level. In addition, it is equipped with an abnormal protection switch to detect whether there are external water and air.
0 to 5V analog signals or PWM signals can be inputted to adjust laser power size.
Open protection: The power supply can work in the open-circuit state within a short time under the condition of good protection grounding, this preventing laser power supply damage caused by laser tube burst.
Ex-factory Aging Test
Each power supply is subject to 12h aging test under the condition of full load and 60°C high temperature and 500-time 7s start-stop test.
Main Technical Parameters
AC input voltage |
AC220V or AC110V |
|
|
DC input voltage |
DC300V or DC150V |
|
|
AC input frequency |
47~440Hz |
|
|
Voltage output |
35KV |
|
|
Maximum current |
23mA(Depending on laser tubes of different manufacturers) |
|
|
Efficiency |
91% |
|
|
Overcurrent protection |
130% of the maximum current |
|
|
Open-circuit protection |
Available (short-time) |
|
|
Structure |
Fan cooling |
|
|
High-level control voltage range |
≥3V |
|
|
Low-level control voltage range |
≤0.8V |
|
|
Working temperature |
-30°C~+65°C |
|
|
Relative humidity |
20~85%RH (Non-condensate) |
|
|
Voltage withstand |
Input-Output |
AC1500V1MIN≤10mA |
|
Input - Shell |
AC1500V1MIN≤10mA |
|
|
|
Output - Shell |
Connection |
|
Insulation resistance |
≥50MΩ (DC500V) |
|
|
Earth leakage current |
≤1mA (AC220V) ≤0.5 mA (AC110V) |
|
|
Vibration resistance |
0.5mm amplitude, 10-55Hz frequency, to three-dimensional direction 2h |
|
|
MTBF |
≥30,000hours |
|
|
Full-load 60°C high-temperature test time |
12 hours |
|
|
7s power start-stop test |
500 times |
|
|
Maximum dimensions (L*W*H） |
205mm*170mm*95mm |
|
