Home > Products > Metallurgy , Mining & Energy > New Energy > Biogas

Plaster welded wire mesh - galvanized or black

Plaster welded mesh with 20×20mm mesh size made from 1.0mm galvanized carbon wire

Plastering welded wire mesh is primarily made of thin low-carbon drawn wire or galvanized wire with a diameter of 0.4 to1.5 mm, located in mutually perpendicular directions and interconnected by spot welding. Its wire diameter is much smaller than the standard welded wire mesh. It is perfect for plastering on uneven surfaces.

Welded mesh plastering has a wide scope. It can be used for the building inside and outside plaster reinforcement. As an essential piece of plastering work, it creates lasting plaster coating for absolutely all surfaces of concrete and brick to wood, and even plaster ceilings. Before plastering, the welded mesh must be mounted on wall by a solid dowel-nails or anchor bolts, which makes the plaster work easier. The welded wire mesh makes the plaster wall surface smooth and no crack, also excludes the impact of external factors on the wall.

If used for plastering in corrosion material, galvanized welded mesh is the best choice, in order to avoid the appearance of red streaks and spots. If used for interior plaster work and no corrosion material, needs no galvanizing, common carbon wire mesh will work well. So most of the plaster mesh - it is not galvanized mesh.

Welded wire mesh used for inside plastering work to brick wall, fixed by nails and small metal piece.

Welded wire mesh used for interior plaster work, with zinc coating anti-corrosion

Specification
Materials: carbon galvanized wire and no galvanized coated steel wire.
Mesh size vary from 10 mm×10 mm to 50mm×50mm.
The most popular mesh sizes: 12×12, 20×20, 25×25, 12×25m.
Wire diameter 0.4 - 1.5mm. 
Roll height: 0.8m, 1.0m, 1.25m, 1.5m, 2.0m.
Roll length: 15m, 20m, 30m, 50m.

Welded wire mesh in roll with mesh size 25mm×25mm form 1.2mm galvanized steel wire