| Model: | ls308 |
|---|---|
| Brand: | NANHUA |
| Origin: | Made In China |
| Category: | Consumer Electronics & Lighting / Lighting / Emergency Light & Indicator Light |
| Label: | aviation obstruction , led strobe , led beacon |
| Price: |
-
|
| Min. Order: | - |
| Live Chat: | Last Online:01 Nov, 2017 |
Applications:
Obstruction light for a wide variety of cranes used in Harbors, Metallurgies, Towers (Telecom, GSM), Smokestacks, Buildings and any other potentially hazardous obstructions to air traffic with a steady burning red safety light.
Main functions and feature
• Die casting aluminum enclosure providing corrosion resistance and durability.
•Use LED cluster as bulb, the life is more than 100,000 hours.
•Self-contained compartment, with stainless steel wire which is used to secure the unit against falling in operation, and ease of mount.
•Sealed construction, can withstand the harsh effects of the environment.
•Built-in micro monitoring controller unit, when and if the service light fails the controller switch on the standby light automatically(optional)
•Built-in photocell can switch ON/OFF the light at dawn and dusk (optional).
•Flashing mode or steady burning is available.
•Service and standby function(optional)
•Lamp housing –Polycarbonate, with good anti-impact strength, thermal stability, high transmittance
•Extremely Reliable—Major Maintenance Cost Saving
Specification
|
Standard |
Compliant to the ICAO (Aerodromes Annex 14)Type B |
Vertical degree: |
≥10° |
|
Light source |
LED |
Horizontal degree: |
360° |
|
LED color |
Red |
Flashing rate |
30 times/min |
|
Operating voltage: |
DC24V |
LED life |
≥100,000h |
|
Power consumption |
8W |
On/off level |
50Lux |
|
Working mode |
Steady burning or flashing mode |
Intensity |
≥32.5cd |
|
Operating temperature |
-30˚C ~ +70˚C |
IP Protection |
IP65 |
|
Relative humidity |
10% ~ 95% (no condensing） |
Weight |
＜4kg |
|
Material |
Base：Die casting aluminum, housing: PC |
||
Installation and Operation
1. Verify whether the supply voltage complied with the rated voltage of the light
2. Secure the light fitting on the top of a machine or lighthouse using G3/4″( G1″) pipe (secure the light reliably against falling in operation.)
3. Open the junction box cover, connect power cable and earth wire to corresponding terminals and then remount the cover.
4. Power on after verification of connection, the service light will light up, if and when the service light fails, the controller will switch on the standby light, at this moment, the maintenance worker should check and replace the service light as early as possible.
Wiring Diagram
Notice
• Ensure the power supply wiring is correct before using;
• Please do not open any part of the light when light is working;
• This product is a sealed structure; Should not be tampered with by anyone other than registered installer
• Please use this product strictly on accordance with the instruction above
