Home > Products > Electronics & Electricity > Transducer

SCK1 Hall Effect Open Loop Current Sensor

Net weight: 58g

Packing: 20sets/carton box

Technical Parameters Ta=25°C
Model: SCK1-150A, SCK1-100A, SCK1-200A, SCK1-300A
Nominal Rms Current (Ipn): ±50AT, ±100AT, ±200AT, ±300AT
Measuring Range (Ip): 150AT, 300AT, 600AT, 750AT
Load resistance Rmax :10kΩ
Supply Voltage: ±4V or ±5V
Working voltage DC: ±12V~±15V(±5%)
 
Dynamic Performance Data:
Accuracy: ±1% FS
Linearity: ±1% FS
Withstand voltage: 2.5kVrms/50Hz/min
Input Offset Voltage: < ±30mV, < ±15mV
Offset temperature characteristics: < ±0.08%/°C, < ±0.05%/°C
Thermal drift of Vo: < ±30mV/°C,  < ±15mV/°C
Hysteresis offset current: 10uA
Response time: < 5uS
Current consumption: <±15mA
 
General Data:
Operating temperature: -20~+80 °C
Storage temperature: -40~+85 °C
Hole inside diameter (mm): SCK1 Series ø20, SCK1T Series ø20
Outside diameter (mm): ø38
 
Remark:
1. SCK1 Series is open-loop current sensor.
2. Square perforation, mainly measure wire conductor current.
3. Advantages: Excellent accuracy, low power consumption, high liability and good current overload capability.
 

SCK1 Series Hall Effect Open Loop Current Sensor
SCK1 Series Hall Current Sensor is a new generation Open loop current sensor based on Hall effect principle, it could accurately measure DC, AC and pulse current and other various irregular waveforms current in electrical isolation conditions. Perforations in the form of a round hole type, use for cable connections, it is widely used in inverter, all kinds of power supply, DC panel, Welding machines and other equipments. Products potting adapt imported resin, which has excellent thermal conductivity and scalability. High-performance core result minimal residual magnetism, all electronic is imported components assembled, along with excellent circuit design, it has excellent characteristics with long-term stable operation even in harsh working conditions.