| Model: | SUN-20 |
|---|---|
| Brand: | SUNRAIN |
| Origin: | Made In China |
| Category: | Metallurgy , Mining & Energy / New Energy / Solar Energy |
| Label: | solar water heater , solar heater , solar collector |
| Price: |
US $180
/ pc
|
| Min. Order: | 5 pc |
| Live Chat: | Last Online:04 Jun, 2015 |
High quality Pressurized solar water heater with CE, ISO, CCC.
| Type: | Evacuated Tube | Pressure: | Pressurized | Circulation Type: |
Indirect / Closed Loop (Active) |
| Heating System: | Thermosyphon (Passive) | Connection Type: | Direct-Plug | Installation: | Freestanding |
| Housing Material: | Colored Steel Plate | Certification: | CE,CCC,ISO9001 | Capacity: | 68 |
| Place of Origin: | Zhejiang China (Mainland) | Brand Name: | Sunnyrain | Model Number: | TG-NP-01 |
| Inner tank material: | SUS304 Stainless Steel | Connection: | Welding Type | optional accessories: |
Electric heater, copper coil inside |
| Delivery port: | SHANGHAI or NINGBO |
Packaging & Delivery
| Packaging Detail: | Cartons and Foams |
| Delivery Detail: | Within 15 days |
Specifications
Solar water heater
.Competitive price and good quality
.CE,ISO9001
.5-15 years warranty
.24hours service
[ACCEPT L/C AND OPEN ACCOUNT] [client customization] High quality Pressurized solar water heater with CE, ISO, CCC.
PRESSURIZED SOLAR WATER HEATER FEATURE:
1.Adopts the best conduction performance metal- heat pipe (copper)
2.Can be used all year round in the cold climate
3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly
4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa
5.No water in the tube, one tube broken don't influence the system working
6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage
7.Dual-purpose brackets for both flat and inclined roof
8.The system is pressurized,it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out
PRESSURIZED SOLAR WATER HEATER SPECIFICATIONS:
1) Model no.: TG-M01 (complete set)
2) Capacity Optional : 68L
4) Working temperature: 99 celsius degree
4) Working pressure: 0.3MPa (3 bar)
5) Vacuum tube: D58 , L1800mm
6) Absorber Area: 1.25m2
7) Cold resistance: -30
8) Tube Hail Resistance ≤25mm
| Specification & Material | |||||||
| Commodity | Integrative Pressurized Solar Water Heater | ||||||
| Inner tank | SUS304-2B with thickness 1.2mm- 310mm | ||||||
| Outer tank | Galvanized steel alloy with thickness 0.4mm/S.S-420mm | ||||||
| Bracket | Galvanized steel alloy with thickness 1.6mm | ||||||
| Heat insulation layer | Imported polyurethane(PU) 50mm | ||||||
| Tube | 58mm*1600mm solar vacuum tube with copper heat pipe | ||||||
| Working Temperature | 99 Celsius degree | ||||||
| Working Pressure | 0.6MPa(6Bar) | ||||||
| Certificate | CE,ISO9001:2008,CCC | ||||||
| Warranty | 5 years for full system / 15 years for vacuum tube | ||||||
Working Principle:
1.The pressurized solar water heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water and hot water,when use, the hot water comes out because of water pressure.
2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot
3.No water in the heat pipe makes the whole system could bear pressure
| Payment Terms: | TT / LC / DP / DA ) |
|---|---|
