kopo rust converter z-5115
Add to Basket
|Origin:||Made In China
|Category:||Services / Trade Agent / Chemicals Agents
|Min. Order:||1 ton
|Post Time: ||01 Nov, 2004
|Last Modified: ||03 Aug, 2009
Kopo Rust Converter z-5115 is a light green liquid type.It can be applied on of any surface iron metal and can get the best result of rust converter,metal door and window etc.
When steel and iron are applied with Rust Converter on the rusted or non-rusted surface it affects the rusted area and forms a thin phosphate coating which will prevent further rusr.and is also good for paint bond.
Kopo Rust Converter used on iron metals for indoor storage will prevent rust for 6 to 12 month.
1.Kopo Converter z-5115can be used by spraying,brushing,swabbing or dipping.
2.Clean the oiled and greased surface of the new metal before applying it.
3.Brush the rusted metal with a steel brush and clean the oiled and greased surface of rusted area,if there is any ,before applying it.
4.It is necessary to use an acicl resistant tank,like glass,rubber or plastic for dipping operations.Dipping time 1 minute enough.
5.After spraying,brushing,swabbing or dipping wait for 12 to 16 hours for drying thorough then applying paint or for store.
1.Appearance:Light green liquid.
3.Chemical component:Phosphoric Acid type.
4.Specific Gravity :1.23-1.25
7.boiling Point:Approximately 80'c
a)Tempory contact wity skin is not barmful,however,suggest washing with soap and water.yet, in frequent contact,it is better using rubber gloves or protective clothing.
c)Surface Pollution:Basically none,but when it is spilled flushing with water to neutralize any possible effects of the concentrate compound.
9.Chemical Reaction:It react with rest and iron to form iron phosphate.The resulting on surface of ferrous metals is inert.It become hard and slightly grey in apperarance.It will not produce a separate coating on the surface being treated.It react chemically with and become partly the metal surface.
10.Application :Kopo Rust Converter is used as you received,no special mixing and no solution controls are required.
a)Store in room temperature is recommended.
b)Three years is storage is maximum.
c)Store and use:-30'c to 40'c
click for larger image
To report fraudulent or illegal content, please click here
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
China Suppliers Quick Searching: