Model: | CA1Q |
---|---|
Brand: | UEA |
Origin: | Made In Taiwan, China |
Category: | Chemicals / Adhesives & Sealants |
Label: | CYANOACRYLATE ADHESI , GLUE , ADHESIVE |
Price: |
-
|
Min. Order: | 50 pc |
Last Online:10 May, 2021 |
Description |
|
ULTRABOND CA1Q is a low viscosity ultra fast setting velocity Ethyl Cyanoacrylate adhesive. It is especially for difficult to bond substrates. Special for acidic wood working. |
||
|
|
|
||
Application |
|
Ideal for bonding plastics, rubber, TPR elastomers. Special for difficult to bond rubber compounds. Including EPDM, nitrile, neoprene, viton, EVA, SBS rubber, ABS, plasticized PVC & rigid PVC. For silicon rubber, polyolefin (PE, PP) bonding use ULTRABOND CP-1 Primer. |
||
|
|
|
||
Full Cure Speed |
|
Plastic Rubber Metal Wood |
: : : : |
2 – 3 seconds 2 – 3 seconds 3 – 10 seconds 2 – 10 seconds |
|
|
(22℃, 50% relative humidity ASTM D1002, 0.1 N/mm2 tensile shear strength) |
General Properties
Uncured monomer
Main Component |
|
Ethyl Cyanoacrylate |
Appearance |
|
Colorless Transparent Liquid |
Specific gravity, 25°C |
|
1.05 |
Viscosity 25°C (CPS) Brookfield LV |
|
2 – 3 CPS |
Spindle 2 @ 30 rpm Flash point |
|
>82°C |
Shelf life (20°C) months |
|
6 |
Storage |
|
Under 10°C |
(Stored in cool & dry place, unopened bottle & out of direct sunlight) |
Cured Adhesive
Gap Filling |
|
0.04 mm |
Tensile Strength steel – steel ASTM D-2095 |
|
25 ~ 30 N/mm² |
Tensile shear Strength steel/steel ASTM D-1002 |
|
15 ~ 26 N/mm² |
Service Temperature Range |
|
- 55 ~ 82°C |
Full cure time |
|
24 hours |