Home > Products > Electronics & Electricity > Electric Control System

www.eulightings.com

FEATHERS

◆ Meets DMX512/1990
◆ 256-level brightness,full-color control
◆ With 3 channels output and Max.3A/CH output
◆ With control system,can express perfect effect
◆ With the light color selected mechanism, and be able to control the light with 1~3 colors
◆ Can set the DMX address freely
◆ Can be custom-made

TECH. CHARACTERISTICS DIMENSION
Decode CH.： 3CH
Input Signal： DMX-512/1990 digital signal
Output Signal： can drive 3A(Each CH.)
Power Supply： DC 12~24V
Power Dis.： <1W
Power Output： <216W(24V);<108W(12V)
Operating Temp.： 0~50℃
Size： 86(mm)*51(mm)*17.8(mm)
Weight： 110g

Input and output interfaces can be interchanged for using
◆ Address setting interface
How to use See "DMX series of addresses dial code table"
◆ Addresses dial code table of DMX series
DC 12-24V input,supply power for decoder and the lamps it takes.
◆ Driver output interface
Common anode,V+ and R,G,B interface，can drive kinds of RGB module or single-color module,
Can regulate output current according to the actual load.
remark:
Connect the anode and RGB wire of common anode RGB module to the output interface of decoder directly;
Connect the anode wire of single-color module to V+ on decoder,and connect the cathode wire to one of RGB pin
according to the LED's color; Connect several colors single-color module to one decoder,please connect their
anode wires to V+ pin on decoder.

Connecting of DMX-512 Signal
◆ DMX signal cable used the CAT-5 cable or three-core shielded cable，and DMX signal has the
positive(+) pole and negative (-) pole. While welding the DMX signal cable plug,there must pay
much attention to distinguish between postive(+) and negative(-), and then connect the DMX512 signal
cable with the corresponding input interface of PX24506 correctly.
◆ Connect a signal terminal at the end of the whole connetion(To be PX24506 DIP switches set aside
under section 10 can)