Model: | FS0205 |
---|---|
Brand: | FEETECH |
Origin: | - |
Category: | Toys / Remote Control Toys |
Label: | Rc Robot servo , arduino control serv , rc servo |
Price: |
US $10
/ pc
|
Min. Order: | 10 pc |
Live Chat: | Last Online:28 Feb, 2017 |
Model No.FR0115M | |||
1.Apply Environmental Condition | |||
No. | Item | Specification | |
1-1 | Storage Temperature Range | -30°C~80°C | |
1-2 | Operating Temperature Range | -15°C~70°C | |
2. Standard Test Environment | |||
No. | Item | Specification | |
2-1 | Temperature range | 25°C ±5°C | |
2-2 | Humidity range | 65%±10% | |
3.Mechanical Specification | |||
No. | Item | Specification | |
3-1 | Size | A:40.0mm B:20.0mm C:40.5mm | |
3-2 | Weight | 59g | |
3-3 | Gear type | Metal Gear | |
3-6 | Limit angle | No Limit | |
3-7 | Bearing | 2 Ball bearings | |
3-8 | Horn gear spline | 25T | |
3-9 | Horn type | Plastic,POM | |
3-10 | Case | Nylon & Fiberglass | |
3-11 | Connector wire | 300mm ±5 mm | |
3-12 | Motor | Metal brush motor | |
3-13 | Splash water resistance | NO | |
4.Electrical Specification (Function of the Performance) | |||
No. | Operating Voltage Range | 4.8V | 6V |
4-1* | Idle current(at stopped) | 5mA | 7mA |
4-2* | No load speed | 0.18sec/60° | 0.16 sec/60° |
4-3* | Runnig current(at no load) | 160 mA | 190 mA |
4-4 | Peak stall torque | 14kg.cm | 15kg.cm |
194.8oz.in | 208.7oz.in | ||
4-5 | Stall current | 1200 mA | 1500mA |
Note: "*"definition is average value when the servo runing with no load | |||
5.Control Specification: | |||
No. | Item | Specification | |
5-1 | Command signal | Pulse width modification | |
5-2 | Amplifier type | Digital system | |
5-3 | Pulse width range | 500~2500µsec | |
5-4 | Neutral position | 1500 µsec | |
5-5 | Running degree | 180°(±5°)(when 500~2500 µsec) | |
5-6 | Dead band width | 4 µsec | |
5-7 | Rotating direction | Counterclockwise (when 1000~2000 µsec) | |
FR0115M is low price high quality digital robot servo.
This servo is used in robots or where standard servos are used.
This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering approximately 2A for each servo.
This servo also have different applications for DIY robot.
It can be combined with aluminum servo arm suite