| Model: | - |
|---|---|
| Brand: | KCCV |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Electronic Instrument / Air & Gas Flowmeter |
| Label: | flowmeters , flow meter , flow instrument |
| Price: |
-
|
| Min. Order: | 10 pc |
| Live Chat: | Last Online:27 Dec, 2013 |
FEATURES:
Simple structures, firm, no movable parts and long operation life
No intercepting fluid parts, no pressure loss and fluid clogging
No mechanical inertia, quick response and good stability, application in automatic
examination, adjustment and controlling
Measuring accuracy not influenced by physical parameters such as style, temperature,
viscosity, density and pressure.
Employ Teflon or rubber liner and different combination of electrode material such as
Hastelloy C, Hastelloy B, 316L, Titanium and adapt the need of different mediums.
Supply many styles of flow meters such as inline type and insertion type, etc.
Adopt EEPROM memory to measure operation data, safe and reliable protection of
memory.
Integral type flow meters and remote type flow meters.
LCD back light display with high clearness
TECHNICAL DATA:
|
Suitable Diameter |
DN25~DN2600(below DN25 unstandard) |
|
Electrodes Materials |
316L(stainless steel), HC, HB, Ti, Ta |
|
Suitable Fluid |
Liquid with conductive ratio more than 5 us/cm |
|
Measuring Range |
0.1~10m/s (extendable to 15m/s) |
|
Upper Limit of Span |
0.5~10m/s. 1~5m/s recommended |
|
Accuracy |
0.3, 0.5 ,1.0 |
|
Output Signals |
4~20mADC, load<= 750ohm, 0~3kHz, 5V with source and changeable width. high terminal and effective frequency output , RS485 interface |
|
Operation Pressure |
1.0MPa, 1.6MPa, 4.0MPa, 16MPa (special) |
|
Fluid Temperature |
-20C~80C, 80C~130C,130C~180C Depending on Lining Material |
|
Ambient Temperature |
Sensor -40C~80C. transducer -15C~50C |
|
Ambient Humidity |
<= 85%RH (at 20C) |
|
Cable Outlet Size |
M20*1.5 |
|
Power Supply |
220VAC+-10%, 50Hz+-1Hz, 24VDC+-10% |
|
Power Consumption |
<=8W |
|
Protection Ratings |
Integral type: IP65. remote type: sensor IP68,transducer IP65 |
|
Materials of Liner |
PTFE, soft rubber, hard rubber, etc |
|
Connection of Flange |
National Standard GB9119-88(DIN2051,BS4504) |
|
Earthing Materials |
1Cr18Ni9Ti (stainless steel), HC, Ti, Ta, Cu
|
