| Model: | C-16 |
|---|---|
| Brand: | Kanglibang |
| Origin: | Made In China |
| Category: | Chemicals / Resin |
| Label: | Silicon curing agent , cheap curing agent , cross linking agent |
| Price: |
US $11
/ kg
|
| Min. Order: | 50 kg |
| Live Chat: | Last Online:06 Mar, 2014 |
Colorless Anti-Yellowing Curing Agent C-16
The cured silicone by this agent are characterized non-toxi, no bad smell, and good anti-yellowing. Widely applied to high quality required and food grade silicone products. Silicone raw material should be cured at high temperature(170℃).
Note: This agent is an inflammable and volatile liquid, Please watch out during work time.
Component:
1、Anti-Yellowing Agent 2、peroxide 3、polysiloxane
Physical Properties (Tested by KE-951U Gel)
|
Appearance: Milk white or semi-transparent liquid Specific Gravity(g/cm³)（23℃） 0.9~1.0 Hardness(ShoreA) 49~51 Tensile Strength(Mpa): 10~13 Elongation(%): 500~530 Cracking resistance(KN/m) 24~27 Compression Set %(100℃/22h) ≤5 |
Method of Application：
Curing Temperature 180℃
Application ratio: 1.5-2.5%
This agent must be add by many time with a small quantity. If not, fewer electrostatic spark and over heat from barrel will cause material burning during the mixing time, The fire can be put out by foam extinguisher.
Notes:
1. Avoid to contact with rust, heavy metal compound, metal salt, drying agent etc.
2. High vapour pressure agent easy to volatilize. Please sealed stored on free time.
3. The mixed silicone should be used up within 12 hours. If not, the curing time will be longer than before.
Storage and Shelf Life：
Keep in dark and ventilate place,away from light and fire. Storage for 6months below 25℃ without open.
Packing：
20KG/Bottle
.jpg)
|
Special Silicone Adhesive and Silicone Primer |
|||
|
Name |
Model No. |
Packing |
Mark |
|
3kg/10kg |
Applied to double side tape(3M),mainly used for household appliances. |
||
|
1000ml |
Silicone surfactant, matched with instant glue, applied to P+R process widely. |
||
|
500ml |
Activating TPU surface,matched with 603, applied to keypad assembly process widely. |
||
|
500ml |
Activating silicone surface,matched with instant glue,applied to P+R process widely. |
||
|
1kg |
Applied to glue silicone to metal at room temperature or high temperature,applied to kitchenwares widely. |
||
|
100g/330g |
Silicone glue to silicone at room temperature,replaced Wacker E41& E43. |
||
|
100g |
Silicone glue to nylon or resin at room temperature, |
||
|
300g |
Applied to silicone medical parts.It will developing under X-ray at room temperature cured.Such as catheter etc |
||
| Super Glue | 603 | 20g/1kg |
Used for silicone glue to metal or TPU materials.Strength adhesion and low whity.(Match with primer) |
| Instant Glue | 460 | 20g/1kg | Used for silicone glue to plastic materials.Strength adhesionand low whity.(Match with primer K770) |
| Instant Glue | 803 | 20g/1kg | Low corrosion type instant glue |
|
CL-26A/B-1 |
1kg |
Silicone binding agent for PET at middle temperature. |
|
|
1kg |
Silicone glue to silicone at high temperature,high adhesion and fast curing. |
||
|
CL-24C |
1000ml |
Uncured silicone glue to nylon in mold.Applied to kitchen-wares widely. |
|
|
CL-26A/B |
1kg |
Uncured liquid silicone bonding with metal/nylon at middle temperature. |
|
|
CL-24 |
1000ml |
Uncured liquid silicone bonding with metal/nylon at high temperature. Applied to kitchenwares. |
|
|
Silicone Additives |
|||
|
5kg |
Applied to FDA and Medical grade needed silicone rubber products.
|
||
|
kg |
Silicone conductive coating, mainly used for silicone tubber cable accessories. |
||
|
20kg |
The cured silicone products with odourless. |
||
|
20kg |
Frosting from the silicone rubber production process. |
||
|
20kg |
Paste, add in silicone rubber, easy to disperse and good peeling off effects. |
||
|
10kg |
Water, Spraying on the hot mold, well peeling off effects. |
||
|
Special silicone ink |
1kg |
Conductive ink,printing ink,coating ink,soft coating for protecting caseand keypads.
|
|
|
10kg |
Liquid silicone pigment,applied to silicone resin and liquid silicone rubber asextrusion process based. |
||
|
1kg |
Paste silicone pigment. High temperature resistance and easyto disperse. |
||
|
Silicone Rubber |
|||
|
|
25kg |
For all silicone products |
|
|
|
25kg |
For all silicone products |
|
|
|
25kg |
For all silicone products |
|
|
|
|
|
|
Contact Person
| Ms. Jubilee 0086-13823747978 / export@klbsilicone.com |  |
