| Model: | AJ3C-220 |
|---|---|
| Brand: | ANSUN |
| Origin: | Made In China |
| Category: | Security & Protection / Surveillance Equipment |
| Label: | camera arrester , surge protector , 3 in 1 arrester |
| Price: |
¥155
/ pc
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:24 Dec, 2013 |
Feature
1) International famous core component brand
2) High discharge current capacity, superior transmission performance, no leakage current
3) Multi stage protective circuit of camera power, PTZ control and video cable
4) Small size, easy installation
5) Low residual voltage, good protecting effect
6) Quick response, stable performance, reliable working
Specification
|
Product model |
AJ3C-220 |
|
|
1. power SPD specification |
||
|
Max continuous working voltage (Uc) |
220V AC |
|
|
Nominal discharge current (In) |
10KA |
|
|
Max discharge current (In) |
20KA
|
|
|
Protection level |
≤100V |
|
|
2. signal SPD specification |
||
|
|
Net |
PTZ control |
|
Max continuous working voltage (Uc) |
5 |
12 |
|
Nominal discharge current (In) |
5KA |
|
|
Max discharge current (In) |
10KA |
|
|
Protection level |
≤25V(core wire—case/ground) |
|
|
Data transmission rate |
≤100Mbps |
|
|
Impedance |
75Ω |
|
|
Insertion loss |
≤0.5dB |
|
|
Interface type |
RJ45 |
2P terminal |
|
3. other specification |
||
|
Case |
Aluminum material, oxidation surface(black, silver) |
|
|
Dimension |
110*61*28mm (including interface) |
|
|
Wire interface |
Power supply |
Compression joint port, suitable for 16-26AWG(0.15-1.3mm²) wire |
|
Control signal |
||
|
Net signal |
RJ45 connector |
|
|
Ground |
Earth wire terminal or 2.5mm²earth wire |
|
|
Installation |
Inside of box or cabinet |
|
|
Working conditions |
Temperature:－40～＋85℃； Relative humidity:≤95％(25℃); Elevation≤3km |
|
|
Note: For latest information, please contact ANSUN company |
||
Installation and wiring
1) According to protection demands, the SPD is connected by series between protected devices and signal path, the closer the distance to protected devices, the better the protection effect.
2) To connect separately a）the cable to the input terminal of power, video and control port, b) output terminal of SPD power, video and control to related interface of protected devices, c) ground line of SPD to earth wire of lightning protection system
3) After wiring, please check it until everything is going well, to put into operation.
