Home > Products > Industrial Supplies > Other Industrial Supplies

~

Ultrasonic Hardness Tester U-100

● High Measurement Accuracy — ±3% HV, ±1.5HR, ±3%HB;
● Small Indentation — Only high-power microscope can observe the indentation;
● Efficient Measurement — Result In 2 Seconds;
● Large LCD — Directly display measurement result, times count, Maximum, Minimal, Average and deviation;
● Easy Operation — Operate well after Short training;
● High performance — 2-Year Warranty for Main Unit (Excludes Probe);
● Mass Storage — Save 2000 groups measurement data;
● Simple Calibration — Save 20 groups calibration data for invoking, improve calibration efficiency.

U-100 Specifications:

Product Name Ultrasonic Hardness Tester
Model U-100
Code# 882-121
Loading Force  2Kgf(Optional: 1Kgf, 5Kgf, 10Kgf)
Measuring Rang HV:50～999; HRC:20～70; HB:85～650
Measuring Accuracy  HV:±3%HV; HRC:±1.5HRC; HB:±3%HB
Indenter  136°Vickers Diamond Indenter
Measuring Direction  Support 360°
Data Storage  To save 2000-group of measuring data and 20-group of calibration data
Hardness Scale  HV、HB、HRC
Data display  Loading force, testing-times, Testing result, Average, Maximum、Minimum、deviation and conversion scale.
Hardness indication  LCD display
Operating Environment  Temperature:-10℃~50℃; Humidity: 30%~80%R.H
Operating Voltage  DC 6V
Instrument Dimensions  160x80x31mm
Net Weight  Approximately 500g（Without probe）

U-100 Application Range:

● At present, there are kinds of methods for hardness measurement, commonly used like Brinell, Rockwell, Vickers, Leeb, etc. while the disadvantages are obvious for the above hardness measurement.
● Rockwell and Brinell with heavy loading force and big indentation, lead to serious destruction on sample surface.
● Vickers apply optical measurement, but only professional technicians can operate smoothly, impossible to measure hardness of heavy work piece, installed machinery and permanently assembled parts.
● Leeb hardness tester apply rebound and indirect method to measure hardness, easily lead to big deviation when convert to Birnell, Rockwell and Vickers scales.
● Ultrasonic hardness tester SU100 apply ultrasonic contact impedance method to do comparative hardness measurement for testing pieces, with advantages of high accuracy, efficiency, portable and easy operation.
● Ultrasonic hardness tester SU100 is widely used to measure hardness of small forgings, cast material, weld inspection, heat affected zone, Ion-nitrided stamping dies and molds, forms, presses, thin walled parts, bearings, tooth flanks, etc.