Home > Products > Metallurgy , Mining & Energy > Metallurgy & Mining > Other Metallic

Specifications

1. save cost of sulphoacid
2. improve quality of anodizing film
3. kkep tank liquid equilibrium
 

1.Automatic Omron PLC program controller;

2.removing the quantity of aluminum ion 100~120kg/day;

3.Multi-cycle running automatically.

Specifications

1. acid rsisting
2. wearing rsisting
3. good sealing performance
 

1.Fluorine-plastic anti-acid pump in the anodizing tank :  

    Flow Volume Q=100m3/h  

    Head H=23m

   Power P=11Kw- Four grade motor

2.Fluorine-plastic anti-acid pump in the coloring tank:

     Flow Volume Q=60m3/h,

     Head H=20(m)

     Power P=7.5Kw- Four grade motor  

Woring principle:

Disassembling plate heat exchanger are formed by pressing many wave-grooved metal sheets with the around pressurized by pads at certain intervals.At the same time the frame and pressed bolt are experiencing overlapped pressing.The four angle holes of plate and pad become distributing pipe and gathering pipe of liquid .They can also separate hot and cold liquid properly,which can make them flow in each side of the plate respectively.Heat can be exchanged through plates.

1, a plate heat exchanger is made of high polymer synthetic fiber made by special technology, has high moisture permeability, good air tightness, tear resistance, aging resistance and other characteristics, 


 2, a plate heat exchanger products energy-saving effect reached foreign advanced level, long service life and thermal conductivity is good, apply to indoor and outdoor temperature humidity difference small area,


 3, a plate heat exchanger according to the user's requirements and configuration of heating, refrigeration, purification, humidification, elimination of different functional sections.


 4, a plate heat exchanger typically use stainless steel (SUS 304, SUS316), titanium alloy in vacuum brazing and soldering type, or use the sealing ring bolt locks into a combined.


 5, a plate heat exchanger to form compact plate heat exchanger, can resist the continuous high temperature and high pressure conditions of operation.