Home > Products > Electronics & Electricity > Other Electrical & Electronic

This product is Taiwan kutai EA05A pressure regulating plate, EA05A plate

Automatic plate type 5Amp generator pan

EA05A, automatic adjusting plate type 5Amp generator pan, suitable for 220/380/440VAC type self brushless generator, compatible with Basler KR7, Mecc Alte SR7-1/SR7-2, Marelli Motori M16FA655A-MARK V AVR.

Product features

Voltage regulation rate < ± 0.5%

Applicable to 220/380/440VAC brushless generator

Select 50/60Hz to toggle switch

Small volume, light weight, strong weatherability

With low voltage protection and slow up function

With EMI suppression circuit

With high breaking capacity fuse protection

Detection of input power input field output voltage regulation voltage external voltage regulation voltage slowly build time consumed power EMI inhibit the temperature stability of low frequency protection work environment characteristics of the adjusting knob size and weight

EA05A technical parameters

Voltage: 220/380/440VAC single-phase two-wire to toggle switch selection

Frequency: 50/60Hz to toggle switch selection

Voltage: 100~300VAC single-phase two-wire

Voltage: the maximum 90VDC 240VAC input

Current: 5A continuous, non continuous for 10 seconds 7A

Resistance: minimum 12, maximum 100.

< ± 0.5% (engine speed variation in 4%)

In the AVR input terminal to remanence voltage above 5VAC

1K Ω, 1Watt potentiometer is ± 7%

2 seconds

The maximum 8Watt

The built-in electromagnetic interference filter

Every C change, 0.03% voltage drift

The turning point for 55Hz 60Hz system (a turning point for the factory setting)

The turning point for 45Hz 50Hz system (a turning point for the factory setting)

Operating temperature: -40~70 degrees C

The storage temperature: -40~85 degrees C

Relative humidity: 95%

Vibration: 3G @ 100~2KHz

VOLT: adjusting voltage

STAB: adjust stability

U/F: adjust the low-frequency protection point

101 x wide and 69 x high and 47.5 mm

The 183g + 2%