| Model: | KLF-TV-3/24 |
|---|---|
| Brand: | KERBS |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Other Electrical & Electronic |
| Label: | cctv lightning spd , cctv surge protector , 24V cctv spd |
| Price: |
-
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:02 Jan, 2014 |
Three in one surge protector: 24V
1.Production Describe:
Three-in-one SPD is applied to the lightning surge protection of camera monitoring system front-end, power cord, video line and signal line .
◆It is use for the lightning protection of high-speed ball, medium-speed ball and PTZ camera, power supply voltage is 24V.
◆It provide the integration, anti-surge design to power, video and control line of surveillance cameras,
which can effectively balance the potential difference of each line.
◆It can effectively prevent the equipment damage which is caused by potential difference of power and network line transient enlargement.
◆It is designed with advantage of large intake capacity, low residual voltage, fast response time and long lifetime.
◆It has advantage of integration, small size, simple wiring and easy installation.
2.Technical Data:
|
Type: |
KLF-TV-3/24 |
||
|
Protective range: |
Power supply |
Control |
video |
|
Operating Voltage (Un): |
24V |
5V |
5V |
|
Transmission rate（bps）: |
|
≤1M |
≤10M |
|
Nominal Discharge Current (8/20μ s) (In): |
5KA |
||
|
Insertion Loss: |
|
≤0.2dB |
≤0.2dB |
|
Response Time Tn: |
25ns |
1ns |
1ns |
|
Voltage Protection Level( Up): |
≤150V |
≤20V |
≤15V |
|
Interface Model: |
terminals |
terminals |
BNC75 |
|
Material of Outer Shell: |
Aluminum alloy |
||
|
Working Environment: |
Temperature -40°C~+70°C;Relative humidity<90% |
||
|
Dimension： |
140×75×36mm |
||
|
Weight |
0.25kg |
||
3.Production Installation:
1. This product is in series installed on power cable, signal line and video line of the camera,
the output end is connected with video camera, and it is better to keep away from the camera less than 50cm during installation.
2. The power supply connection: Products should be match with protected camera power supply voltage,
when it needs installation please according diagram to install. One of power supply line,
"L +" is fire wire or positive, "N-" is zero line or negative.
3. The video signal connections: The input end is connected with the signal channel, output end is connected to the video camera,
and connectors should be connected securely and not be reversed.
4. The control signal connections: Each group use a pair of signal lines, then connect terminals whose logo are "signals".
5. It is use for indoor operation, such as outdoors installation, you must install waterproof shell.
6. All wiring must be solid and connect by electric. SPD cable: BVR≥2.5mm2, grounding line: BVR ≥ 6mm2.
7. Lightning proof grounding should be consistent with lightning protection regulatory requirements,
grounding wire should be as thick and short as possible, resistance should be less than 10Ω.
