Home > Products > Security & Protection > Other Security & Protection

Video Test
Signal mode
NTSC/PAL (Auto adapt)
Display
3.5 inch digital TFT-LCD ,480（RGB）x 320 resolution
LCD adjustment
Brightness, Contrast, Saturation adjustable
Video IN/OUT
1 channel BNC Input & 1 channel Output
Video Output Mode
1.0 Vp-p
Video Level test
Level test
Video signals measured in IRE or mV
PTZ controller
Communication
Support RS232 and RS485
PTZ Protocol
Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.
Baud Rate
600，1200，2400，4800，9600，19200,57600,115200bps
Video Signal Generation
Color bar generator
Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color )
UTP Cable Test
UTP cable test
Test UTP cable connection status and display in the screen. Read the number of the test box.
DC12V 1A power output
DC12V power output
Output DC12V1A power for camera
Cable Scan
Cable Scan
Search the cable by the audio signal
Audio input test
Audio input test
test the pickup and other audio equipments on the front-end
RS485 data analysis
Data Monitor
Captures and analyzes the command data from controlling device
10 x zoom of image
Image 10x zoom
10x zoom image display and video out
Photograph,Video record, Record playback
Photograph
snapshot and save the current image as JPG file
Video record
Video record and storage the file
Record playback
To view the storage file in the SD card
Port flicker
Port flicker
Find the connected POE port quickly.
IP scan, Link monitor, PING test
IP scan
Find out the connected IP camera or the other network equipment IP address quickly.
Link monitor
Check the IP address whether is occupied
PING testing
Test IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address
POE tester
POE tester
Display the power supply voltage and cable connection states
Optical power meter
Calibrated Wavelength(nm)
850/1300/1310/1490/1550/1625nm
Power range(dBm)
-70～+10dBm
Sensitivity(nW)
0.001nW
Connector type
FC/PC
Data hold
Display data hold
Relative measurement
Display the measurement value
Digital Multimeter
AC/DC Voltage
0-660V auto/manual range, the min resolution is 0.1mV
AC/DC current
660.0uA , 6.600mA, 66.00mA , 660.0mA, 10.00A
Resistance
660.0Ω, 6.600kΩ, 66.00kΩ, 660.0kΩ, 6.600MΩ, 66.00MΩ
Capacitance
6.6nf～66000uF， the min resolution is 1pf
Diode
0～2V forward voltage, the min resolution is 1mV
Data hold
Hold the measurement optical power value
Relative measurement
display the difference value of the first testing result
Continuity testing
Built-in buzzer will sound, if resistance is lower than 50 Ω
Testing speed
3 times/ seconds
Data range
-6600～+6600
TDR Tester
TDR Tester
breakpoint and short circuit measurement(BNC cable, telephone cable)
POWER
Power Adapter
DC 5V（1.5A）
Battery
Built-in 3.7V Lithium polymer battery ,3000mAh
Rechargeable
After charging 3-4 hour, working time lasts 11 hours
Low Consumption
Energy saving technology, the battery icon real-time display
Parameter
Operation setting
English/Chinese and other languages OSD menu
Auto off
5-60 (mins)
Key tone
On/Off
General
Working Temperature
-10℃---+50℃
Working Humidity
30%-90%
Dimension/ Weight
194mm x 112mm x 48mm / 540g