Home > Products > Home Supplies > Other Home Supplies

 Installation and operation manual

  Product profile

  Thanks for using our products,  It used advanced technology and newest chipset, which improves the stability of the system and far distance. The system has the function such as: visible phone, hand-free surveillance, unlock, infrared vigil, every household intercom function, auto turn off, and so on. The system has multi tie-in function such as one camera to one monitor, one to two, and two to two . Satisfied the needs of different customers，which is the best present for your friend

  Configurations

     User's Manual
  Power supply adapter
  Hanging  board
  Indoor device
  Outdoor device
  A/V cable and wirings

  Features

  Entrance machine with the water, oxidation and wear-resistant aluminum-alloy panel.
  The 7-inch  LED screens with no radiation, low power, high resolution and high resolution.
  Hands-free intercom
  Doorway monitoring
  Unlock the electric-controlled door lock
  There are eight kinds of chord ring tones to choose from.
  The intercom and ring volume can be adjusted by the user.

  Description of entrance machine

  1.Microphone
  2.Camera
  3.Night light
  4.Call button
  5.Speaker
  

  Description of indoor machine

  1.Speaker
  2.7-inch LED
  3.Intercom key and Monitoring key
  4.Every house hold key
  5.Unlock key
  6.Microphone
  7.Brightness adjustment
  8.Colour adjustment
  9.Ring volume
  10.Intercom volume

  operating instructions

  Call button : The visitor presses the button of entrance machine,and a ringing tone will be sent from the indoor machine, and the image of visitor will be shown. The master can press the intercom key of indoor machine to talk with the visitor, the intercom and video delay will be about 60 seconds, if exceeding the delay,it will turn off automatically.
  
  Monitoring key: Press the monitoring key of indoor machine to monitor the doorway, and the monitoring time is 60 seconds.
  The intercom key and Monitoring key is same.
  
  Every house hold key :only avaiable when more than 2 monitor.
  When you click the  key,other indoor machine will be ring,click the key can be answer ,click again to hangup.
  
  Unlock key:When you intercom with the visitor (anther time press key will be not reaction),you press the unlock key of indoor machine, the electric control lock will be open,and delay about 5 seconds .
  
  The brightness, color and intercom volume of indoor machine can be adjusted respectively by the potentiometer, and the visitor speak  volume can be adjusted  to achieve the best effect.
  

  Installation

  1.Install the entrance machine

  The four cable pl ed into the jack (GAVB+).
  Unscrew the screws at the front of entrance machine,and remove the bottom.
  The bottom fix on the wall,The entrance machine install on the bottom.
  Install the entrance machine 150CM away from the ground(the height is based on the camera effects ),avoiding the direct light.

    2.Install the indoor machine

  Fix the hanging board  on the wall with the screws.
  The four cable pl ed into the jack(GND AIN1 VIN1 B+1). 
  The indoor machine installed on the hanging board.

  Notice

  1.Don't put the video interphone system near the strong magnetic field.
  2.Don't spray water or other liquid directly to the video interphone system.
  3.Don't hit indoor device and outdoor device heavily.
  4.Don't put the video interphone system under the strong sunlight or the strong reflection radial.
  5.The indoor machine will be sleep ,but if you have a long time not use ,please pull out power supply.
  6.In order to achieve the best effect of the image, please tear the protective coating on the screen before using it.