Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Radio TV Equipment

Ⅰ Rocker v Material of Jib Arm is High-Strength Lightweight Aluminum Alloy (Space material). The body of the Arm is the triangle structural design of international standard, anti-bending, anti-fibrillation, anti- throwing, anticollision,with 6 wind holes,high wind resistance coefficient, so as to make a more stable shooting; v Group-fit structure,can easily combined length, to achieve arm's multi-purpose,equipped with anti-fibrillation system of wire rope of tool-free installation; v Equipped with professional tripod supporting system with specific main strut,to guarantee the stable and safe of the whole system; v Configuration of foldable universal move freely four-wheel-dolly with tool-free installation; v May be used as supporting broadcast vehicles, studio and so on; v Air Aluminum (arm body only). Ⅱ Remote Head

① Motorized Remote Head of Professional Slip-Ring of U-Shape Double Arms（Standard） v Slip-ring technology: horizontal and vertical direction could be unlimited degree rotation (N-360 degrees);        Completely solve the shooting problems in the cable winding, thus ensuring the stability of the video signal trans- mission; v General framework of U-shape double arms;loading capacity ≤ 10KG; v PTZ transfer speed: full speed: the slowest ≤ 0.2 cycles / min, Fastest ≥ 7 cycles / min; v PTZ motor imported from Germany high-power motor, low noise and little vibration;        Horizontal motor base using wedge mobile, vertical motor base using spiral adjustable way that can better adjust the gear gap;       Soft-start circuit structural design, horizontal and vertical direction of the speed control of a custom adjustment, smooth and stable rotation, a clear sense of direction of 45-degree angle spinning; v Motorized Pan & Tilt Head control device: Horizontal and vertical direction,step-less speed regulation.       The level of unrestricted free to rotate(N times 360-degree or more);        Vertical(Rotate the camera with power supply at the same time,or long high-definition wide-angle lens)unrestricted free to rotate (N times 360-degree or more);        Level and vertical delay filming to make shooting more stable and smooth, tool-free installation. v Installation way: tool-free installation (Portable loading fixture, so that loading and unloading of Motorized Pan&Tilt Head more convenient); v Air Aluminum Case (Specially for Motorized Pan & Tilt Head). ② DV Specific “U” Shape Three Axes Head with Slip-Ring Technology（Optional） v Slip-ring technology: horizontal, vertical and rotation direction could be unlimited degree rotation (N-360 degrees);        Completely solve the shooting problems in the cable winding, thus ensuring the stability of the video signal trans- mission; v General framework of U-shape double arms; Loading Capacity ≤ 10KG; v PTZ transfer speed: full speed: the slowest ≤ 0.2 cycles / min, Fastest ≥ 7 cycles / min; v PTZ motor imported from Germany high-power motor, low noise and little vibration;        Horizontal motor base using wedge mobile, vertical motor base using spiral adjustable way that can better adjust the gear gap;        Soft-start circuit structural design, horizontal and vertical direction of the speed control of acustom adjust-ment, smooth and stable rotation, a clear sense of direction of 45-degree angle spinning; v Motorized Pan&Tilt Head control device:Horizontal,vertical and otation direction,step-less speed regulation.        The level of unrestricted free to rotate (N times 360-degree or more).        Vertical (Rotate the camera with power supply at the same time, or long high-definition wide-angle lens)unrestricted free to rotate (N times 360-degree or more).        Level and vertical delay filming to make shooting more stable and smooth, tool-free installation. v Control Handles:one for X-Y axes, and the Z axes controller was compatible with servo system handle, easy to control alone;        With independent regulation on the speed,direciton and damping for the X,Y and Z axes; v Installation way: tool-free installation (Portable loading fixture, so that loading and unloading of Motorized Pan & Tilt Head more convenient); v Air Aluminum Case (Specially for Motorized Pan & Tilt Head). Ⅲ Central Controller   v AC: 220V, with 220V-12DC Adapter;       DC: DC12V       (With the camera battery match, convenient and quick);       (Optional SONY type, Anton Bauer socket) v Direct power supply to video camera can be realized; v Composite Main Cable:the main cable of multi-core anti-jamming, alignment Science, a cable lets go video, power, control signals and so on, the signal does not interfere with each other, do not interfere with image; v Speed and damping switch for  the horizontal and vertical direction of remote head; v Rotary switch of horizontal and vertical direction of remote head; v Power control switch. Ⅳ  Servo System v For DV\HDV; v A rod control(variable); v Support  zoom/focus/aperture control for Panasonic and Lan Interface cameras(Optional); v Controller for EX series cameras(optional); v Control cameras start/stop REC button; v System control line: × 1 v Control handle; Ⅴ LCD Monitor v (8 inch), bright; v High brightness cold cathode fluorescent tube;PAL SCAM; v No shooting blind,and with the application of vision automatic tracking,to essure the pictures always facing the cameramen; v A large set of foldable leather hood; v Multiple form of power supply to meet the needs of different scenes; v Light weight easy to carry.

Ordering Information: