Home > Products > Computers & AV Digital > Computer Components > Hard Disk

The Renice X9 SSD has a SATA III (6Gbps) interface allowing for read/write speeds of 520/500MB per second. The X9 is ideal for a variety of applications, including enterprise solutions where data throughput needs to be high, as well as industrial installations where the potential for high shock and vibration conditions exist. X9 series SSD carry 256MB DDR which gains high performance. Design using MLC NAND flash technology, and utilizing a unique firmware architecture, the X9 maximizes the bandwidth limitations of SATA III giving up to 50,000 input/output operations per second( IOPS).

Features:

● Standard Serial ATA 2.6: SATA III, 6.0Gbps (Backward compatible with SATA 1.5 and 3.0Gbps)

● Form factor: 2.5 inch (100.0mmX70.0mmX9.0mm) L×W×H

● Connector: 7-pin signal segment and a 15-pin power segment

● Performance: -Max Sequential Data Read/Write: 520/500MB/s -Read/Write IOPS: 55,000 / 60,000 Access Time: 0.1ms

● Capacities:

32GB, 64GB, 128GB, 256GB, 512GB, 640GB (MLC)

32GB, 64GB, 128GB, 256GB, 512GB, 640GB (SLC)

● Power Management: -Input voltage: 5V (±5%) -Support Hot Plug/Removal Function

● Temperature ranges:

– Operation: 0~70°C (Standard) -40 to 85°C (Industrial)

– Storage: -50 to 95°C

● Intelligent features:

– Flash management algorithm: static and dynamic wear-leveling, bad block management algorithm

– Supports dynamic power management and SMART (Self-Monitoring, Analysis and Reporting Technology)

– Supports BCH ECC 6~64bits in 1KBytes

– Support Power Failure Protection

– TRIM support
● MTBF: >3,500,000 Hours @25C