Home > Products > Construction & Decoration > Waterproof Materials

JBY800 high pressure leak stoppage grouting machine

The electric high pressure injection pump is a professional machine used for high pressure chemical grouting, which works with single chemical grouting material. It can produce high pressure itself when working on leakage-stop constructions. It is widely used on engineering include architecture, underground, water conservancy, environment protection, civicism, subway, tunnel, culvert, crack reinforcement. It is the preferred equipment for waterproofing.

Performance

Weight: 8.0KG

Safe Range of High Pressure Hose :< 13500PSI

Max Output Pressure: 13500PSI

Safe Range of Switch Valve: < 10000PSI

Restarted Pressure :< 7500PSI

Safe Range of Grease Coupler :< 16000PSI

Power: 560w single-phase alternating current 220v/50Hz

Suitable material: epoxy resin and polyurethane resin etc.

Application Places

Subway, tunnels, culverts, sewage treatment pond, basements, underground garage, underground passage, roof concrete slab cracks, wall pipe, wall, the water leakage cracks in concrete, concrete structure, beam, column, slab cracks etc.

Direction for Use

1. Before starting, please confirm whether the switch of electric drill is in R (forward) position or not.

2. When first time used the new machine, you should pour the lubricating oil into material cup and open the power then rotate the material cup over again.

3. After completing construction, you must use the cleaning agent clean the machine immediately.