9-pin industrial display into a 15-pin VGA monitor
In the global process of industrialization, the emergence of a large number of industrial control equipment . China as the world's processing power , with a large industrial equipment. However, most of the early industrial equipment, such as 80 's, 90's purchase of industrial equipment most of the early display systems such as RGB, RGBS, RGBHV, CGA, EGA, 9 -pin monitor , the majority has been a long time aging, or monitor has been unable to show that needs to be replaced , while the factory is no longer available to match the monitor. Industrial monitor repair very difficult. Jiang map Technology KTV148 RGB EGA CGA monitor. Video signals can be directly connected to industrial realization replace old KTV148 monitor RGB, CGA, EGA and other display
Video standards supported : MDA, CGA, EGA, VGA, RGB, RGBS, RGB sog, RGBHV signal
Video input interface: 3-pin , 4-pin , 6-pin , 9-pin , 12-pin , three-row 15-pin , 15-pin double-row , 20-pin , 25-pin and other irregular signal interface , including applicable
Various BNC port signal
Input parameters : Analog Analog RGB :0.7-2 .5 VP-P
TTL digital : High 2.4 ~ 5.0V or Low 0.0 ~ 0.8V
Impedance: 75 ohms - 500 ohms
Scan mode: interlaced / progressive
Output signal: with the input signal changes , LCD
Power: External AC110V/220V turn DC12V power supply , power: 25W
Display size: 12.1 inches , 249 * 187mm ( L * W )
Aspect Ratio : 4:3 Screen Positive
LCD Type: industrial grade TFT
Installation size : 317 * 250 * 45mm ( L * W * H )
Introduction
KTV148 RGB, MDA, EGA, CGA Industrial Monitor Features:
1 support 15KHz to 48KHz horizontal frequency signal field frequency 48Hz to 75Hz, the positive and negative automatically adapt automatically scan frequency input line field .
(2) support line field input to a digital TTL or analog signals .
3 Input Interface : D-sub VGA 15PIN, BNC Interface
4 supports black and white display , monochrome display, color display , true color display .
5 supports automatic identification adjust the screen width and height .
6 support separate sync signal HV, composite sync signal or sync signal Cs G composite video signal (Sog), positive and negative polarity are automatically recognized.
7.75-500 Ohm high input impedance, adapt to the strength of the signal source.
( Technical Support :136-8688-9647 QQ: 1251701967 WWW.KONGTO.COM)
