| Model: | - |
|---|---|
| Brand: | TOP |
| Origin: | Made In China |
| Category: | Industrial Supplies / Machinery / Filters |
| Label: | Self-cleaning Filter , Self clean Filter , Filter |
| Price: |
US $110
/ pc
|
| Min. Order: | 1 pc |
| Live Chat: |  | Last Online:07 Apr, 2022 |
TPB filter has 5 sub-series: TPB01 series self-cleaning filter (TPB01 filter for short), back-flush with the filtrate; TPB02 series self-cleaning filter (TPB02 filter for short), back-flush with the external clean fluid; TPB03 series manual back-flushing filter (TPB03 filter for short), simplified by removing the control system and pneumatic actuators from the TPB03filter; TPB04manual back-flushing filter (TPB04 filter for short), simplified by removing the control system and pneumatic actuators from the TPB filter; TPB05 series is the manual multi-plex filter.
Applicable Typical Industries and Liquids
■ Applicable industries: petrochemical industry, water treatment, papermaking etc.
■ Application of liquid types: petrochemical diesel, gasoline, naphtha, FCC slurry, AGO atmospheric gas oil, CGO coker gas oil, VGO vacuum gas oil; water treatment of raw water, process water, clean water, clean water, cooling water, water spray, water needle water etc.
■ The main filtration effect: to remove particles, cleaning fluid, protection of key equipment.
■ Filter type: modular backwashing filter, automatic continuous online filter
| Price Terms: | FOB CIF CFR |
|---|---|
| Payment Terms: | TT/LC |
| Lead Time: | 30 DAYS |
| Specifications: | Suitable viscosity: <50cps ■ impurity content: <300ppm ■ minimum inlet pressure: >0.3MPa ■ installation location: pump ■ filtration precision: 50-500 μ M ■ standard design pressure: grade 1.6MPa, 2.5MPa, 4.0MPa ■ maximum design temperature: 0-250 ℃ (depending on the seal) A filter unit number: 3-24 ■ filtration unit import and export: valve size (Note 1) DN50 (2 "), maximum flow rate (25m3/h; DN65 2 1/2") ■ The maximum flow rate: 42m3/h ■ filter backwash valve size: DN50 (2 "); DN65 (2 1/2") ■ filter element filter area: C type, K type, 3140cm2 2670cm2; ■ backwashing pressure: 70KPa-130KPa ■ alarm pressure: 200KPa ■ main pipe import and export size: DN80-DN400 ■ main pipe inlet and outlet flange form: loose flange, flange plate galvanized carbon steel heat ■ main pipe Import & Export connection standard: HG20592-2009 (standard, compatible with DIN), HG20615-2009 (compatible with ANSI B16.5) ■ Filter element type material: Wedge wire slot type metal filter element, material 304/316L ■ shell is connected with liquid material: 304/316L ■ shell sealing material: NBR nitrile rubber (standard) /VITON (FKM) fluorine rubber ■ A fluid control valve: pneumatic ball valve, valve seat material protection grade IP65, PTFE |
| Advantages: | Only need one additional filtration unit as a backup of the whole system, low risk of downtime, small investment. ■ Without interrupting the filtering case, can maintenance the filter unit off-line one by one . ■The filter element is very convenient to remove to clean, when filter the stubborn impurities and require clean regularly is the best. ■ Complete recoil through the valve switching, no complicated mechanical structure, easy to maintain. ■ It can continuous filter when back flushing, the system does not need to parking, it can reduce the cost of parking. ■ Modular combination, easy to expand, increasing the number of filter units can meed the expand filtering flow. ■ Using the Wedge wire slot type as filter element, easy to clean, very sturdy and durable, long service life ■ The TPB filter pull in the external fluid back flush , can be installed in the front of the pump , also suitable for low entrance pressure fields. ■ Using high quality pneumatic ball valve module combination, equip the high reliable meter and control system. |
