Pad Printing Silicon Rubber Usages:
Pad printing silicone rubber is mainly used for printing irregular patterns on plastic toys, shampoo, pen, glass, electroplating toys and trade makes and so on.
Pad Printing Silicon Rubber description
Pad printing silicone rubber as a carrier which transfers patterns on the steel plate to the toys products surface.
.
1) High print times
2) Abrasion resistance.
3) Good printing effects
4) Permanent and durable
Pad Printing Silicon Rubber Operation Instructions:
Step One:Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two:vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed mixture into the original mold slowly,
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry and cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kgs/drum vacuumed packing
For further information, please contact with Miss Cecilia
TEL: 086-0755-89948013
Mobile: 086-18938867615
Mail : hyyi(at)szrl(dot)net
Welcome to visit www (dot)szrl (dot)net anytime.
