Model: | LY1-D10 |
---|---|
Brand: | LEEYEE |
Origin: | Made In China |
Category: | Electronics & Electricity / Power Supply & Distribution / Other Power Supply & Distribution |
Label: | surgeprotector |
Price: |
-
|
Min. Order: | 50 pc |
Last Online:23 Jul, 2013 |
Product Description:
LY1-D10 is suitable for TN-S/TN-C-S/TT/IT etc . power supply system of AC 50/60 Hz,=380V,installed on the joint of LPZ1 or LPZ2 and LPZ3,it's designed according with IEC61643-1/GB18802.1,it adopts 3.55mm standard rail,there is a failure release mounted on the module of surge protective device.When the SPD fails in breakdown for over-heat and over-current,the failure release will help electric device seperate from power system and give the indication signal,green means normal,red means abnormal,it's also could be replaced for the module when has operating voltage.
Products features
1.Could be replaced for the module not need power cut
2.Maximum current of endure the lighing stoke 10kA (8/20μs)
3.Time of response <25ns
4.The color of visible window shows operating status,green means normal,red means abnormal
Main technical parameters:
Techinical parameters | Model LY1-D | |||
Rated operating voltage Un(V~) | 220V | 380V | ||
Maximum continuous operating voltage Uc | 275V | 385V | ||
Voltage protection level up(V~) KV | ≤0.7 | ≤1.0 | ||
Nominal discharge current In(8/20μs)KA | 5 | |||
Maximum discharge current Imax(8/20μs)KA | 10 | |||
Response times | <25 | |||
Test standard | GB18802.1 IEC61643-1 | |||
The cross section of L/N line | 6 | |||
The cross section of PE line | 16 | |||
Fuse of switch(A) | 10A, 16A | 16A,25A | ||
Operating environment°C | -40°C~85°C | |||
Relative humudity(25°C) | ≤95% | |||
Installation | Standard rail 35mm | |||
Material of outer covering
|
Fiber glass reinforced plastic |