Home > Products > Home Supplies > Personal Care Appliance

Principle and introduction 

Portable whitening accelerator is a specific wavelength ， specific temperature whitening instrument, Cooperated with peroxide-containing teeth whitening gels. Special light and heat energy is controlled for the peroxide， Which activates teeth whitening gels rapidly in the best temperature range，

●     Exquisite design， Not only for convenient using ,also relieving the tension caused by retractor;

●     Powerful whitening accelerator, both for In-Office teeth whitening and take-home whitening;

●     OLED screen ,convenient operation, visual and adjustable working time；

●     Reasonable circuit design, stable illumination intensity.just a set of batteries can be used more than 200 minutes.

Technology parameters

model：XNS-JD20

voltage：4.8～9.6V（AA 1.5V×6）

current：<500mA

Work for： Continuous operation

Electrical safety requirements

1、Ⅰ kind of ordinary equipment

2、No application of part of the equipment

3、Can't have mixed with air of flammable gas and oxygen pressure anesthesia or nitrogen mixture of flammable gas anesthesia using equipment

4、Can't have strong magnetic environment in the use of equipment

Normal working conditions

Environment temperature range 5～40℃

Relative humidity range ≤80％

Atmospheric pressure range 86～106kpa

Transportation and storage conditions

Environment temperature range -20℃～+55℃

Relative humidity range≤93%

Atmospheric pressure range 50～106kPa

Function is introduced

1、  Open/close whitening accelerator： ON，OFF； Switches, open/close whitening accelerator source, ON open, shut OFF;

2、  working time set： According to the time set key, set the whitening accelerator working time, stop or suspended in the condition of work time Settings, the 10-20-30 min cycle regulation;

Note "set at that time, stop start work time setting for 30 min, has been working for 15 points:

ａ、At this time, pause and set time of 20 min, the key to continue the work started after 5 min stop;

ｂ、At this time, pause and for 10 min set time, whitening accelerator default work time has been completed, start by directly to stop. )

3、  Start/stop: according to start/stop button, whitening accelerator began to countdown work, the end of the countdown to stop work when the whitening accelerator; Whitening accelerator work according to start/pause button, whitening accelerator suspend work, countdown suspended, click again continue to work;；

4、  Stop: work or suspended in the stop button to stop, whitening accelerator to stop working, and into standby mode

5、  Note： Owe electricity instructions: after startup if the battery power icon said that power is not enough, the need to change the battery; In the whitening process like appear owe electricity, whitening every 10 seconds is uttered a prompt, can continue to the whitening process, to stop after the whitening accelerator to change batteries can, whitening process in owe when power will not affect whitening accelerator the expected effect.

１、Please use the folds of the battery, not old and new batteries or different brand battery mixed use;

２、 Battery when used please note the battery or battery own printing precautions;

３、 Please in every time whitening accelerator USES ended, use spray disinfectant cleaner and the open mouth contact part and shiny surface, and with soft cloth to wipe away dry clean; Whitening accelerator shell with a few water use clean cloth can wipe;

Please note: do not use hard brush; Do not contain alcohol, gasoline, XiangJiaoShui of ingredients including disinfection

４、 Portable cold light teeth whitening meter and accessories are recycling electronic products, please will be abandoned whitening accelerator or accessories to scrap recycling station processing

 Fault descriptions and elimination method

１、Whitening accelerator such as appear cannot switch on, may be bad battery contact or the battery power drained, damaged, please reinstall the battery or replace new battery.

２、Could not be ruled out fault and when in doubt, please contact customer service in our company：+86-13535736810

 the packing content list