Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Network Communications Equipment

5.8G 11n 2T2R MIMO AP/CPE PCBA 15.8G 11n 2T2R MIMO AP/CPE PCBA 2
  • 5.8G 11n 2T2R MIMO AP/CPE PCBA 1
  • 5.8G 11n 2T2R MIMO AP/CPE PCBA 2

5.8G 11n 2T2R MIMO AP/CPE PCBA

Model:LT-15840NP
Brand:SOEIZ
Origin:Made In Taiwan, China
Category:Electronics & Electricity / Telecommunication & Broadcasting / Network Communications Equipment
Label:CPE board , AP board , small size AP
Price: US $69 / pc
Min. Order:500 pc
Inquire Now Add to Basket

Member Information

Detail

link-tai technology (Shanghai) Co.,LTD.

Free MemberShang Hai - China
Live Chat:点击这里给我发消息Last Online:02 Sep, 2014

Product Description

Features
General Features
IEEE 802.11n draft 2.0 compliance in 2Tx/2Rx design
Support IEEE 802.11n and 802.11a
Operates in the 5GHz ISM band
Enables bandwidth of up to 300Mbps(Tx) , 300Mbps (Rx) link rate
Over load current protection
Wide Range Voltage support (12-68VDC)

Wireless Features
Number of ESSID (Virtual AP) : 7
Number of associated clients per AP : 32
Setting for max number associated clients
Number of Max. WDS Setting : 4
Setting for 802.11a/n mix or 802.11a only
Setting for transmission speed, Dynamic Wireless Re-transmission
Channel Selection: Manual or Auto
Transmission Power Control : 1~100%
IEEE802.11h – PTC and DFS
IEEE802.11d – Multi country roaming
Channel Bandwidth Seeting : 20MHz or 20/40MHz
Wireless Site Survey
Operation Modes : AP Mode (AP / AP+WDS) , WDS Mode (Bridge / Repeater) ,
CPE Mode (Router / client), Universal Repeater + Client Bridge Mode
IEEE802.11f IAPP : to facilitable faster roaming for the stations among different
APs nearby
IEEE 802.11i Preauth (PMKSA Cache )
HT Tx/Rx Stream selection : 1 or 2
A-MSDU and A-MPDU support
Maximal MPDU density for TX aggregation setting
Short Slot support
RTS Threshold and Fragment Threshold support

Networking
Support Static IP, Dynamic IP(DHCP Client) and PPPoE on WAN Connection
Support VPN Pass Throughput ( PPTP , IPSec , L2TP )
PPPoE Reconnect : Always on , On demand, Manual
MAC Cloning
DHCP Server
802.3 Bridging
DHCP Server ( for CPE Mode and Client Bridge Mode )
Masquerading (NAT) (for CPE Mode)
Proxy DNS
Dynamic DNS
NTP Client
Virtual DMZ
Virtual Server (Port Forwarding)
Support MAC Filter
Support IP Filter
Bandwidth traffic Shaping

Specification
Wireless Standard : IEEE 802.11n / IEEE 802.11a/ IEEE 802.3u 100Base-TX Fast Ethernet
IEEE802.11f / IEEE802.11i /IEEE802.11d

Frequency Band :
IEEE802.11a: 5.15~5.35 & 5.725~ 5.825 GHz for US ; 4.9~5.25 GHz for Japan ; 5.15~5.35 & 5.47~5.725 GHz for ETSI
IEEE802.11n : 5.15~5.35 & 5.725~ 5.825 GHz for US ; 4.9~5.25 GHz for Japan ; 5.15~5.35 & 5.47~5.725 GHz for ETSI

Channel Spacing : IEEE802.11a: 20MHz ; IEEE802.11n: 20/40MHz ;

Operating Channels :
IEEE802.11a / IEEE802.11n: US: 12(Ch:36,40,44,48,52,56,60,64,149,153,157,
161)
Japan:4(Ch:34,38,42,46) ETSI:19(Ch:36,40,44,48,52,56,60,64,100,104,108,
112,116,120,124,128,132,136,140)

Modulation IEEE802.11a: OFDM (64QAM, QAM, QPSK, BPSK)
IEEE802.11n: BPSK, QPSK, 16QAM, 64QAM

Data Rate : IEEE802.11a: 6/9/12/18/24/36/48/54Mbps (auto sensing) IEEE802.11n(draft 2.0) : 300Mbps(Tx), 300Mbps(Rx)
 
Security : WEP (64/128Bit) WPA / WPA2 Hidden ESSID

User Isolation: MAC Address Filter

Receive Sensitivity : -97dBm

Output Power:  27dBm (500mW)

Operating Mode : Pure AP/AP / WDS/ Pure WDS Mode (Repeater/Bridge) CPE Mode
(Router Client )Universal Repeater 

Hardware
Processor Ralink 2880 + 2850 (5G RF)
Flash 4MB
SDRAM 32MB
LED Indication Power, LAN ,Wireless
Ethernet
10/100BASE-TX auto-negotiation
Ethernet port x 1 (RJ-45 connector)
Power over Ethernet
Antenna Connector 2 x IPEX
Environment
Operating Temperature: -30 °C ~ 60 °C
Storage Temperature: -30 °C ~ 85 °C
Humidity: 100%(non condensing)
Power Supply 48 VDC, 0.4A input (POE Injector)
Power Consumption 9W
Dimensions 74 x110 (mm) (Width x Depth)
Weight 0.5Kg

Payment Terms:T/T Before Shipment

Product Image

5.8G 11n 2T2R MIMO AP/CPE PCBA 1
Img 1
5.8G 11n 2T2R MIMO AP/CPE PCBA 2
Img 2

Send Inquiry to this Member

link-tai technology (Shanghai) Co.,LTD.

Xin Jian East Road, Min hang District, Lane 388 , Shanghai .China

Phone:
86-21-34100390
Fax:
86-21-34100391
Contact:
Oscar (Manager)
Mobile:
18016474777
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Network Communications Equipment Made In China Products

,  

Network Communications Equipment China Suppliers and China Manufacturers