car 3D logo door light LED ghost shadow light
Product Description
Discription
Input Power: 3W
Operating voltage: 8 to 28V DC
Operation Temperature: -40C to +105
Storage temperature: -40 to +125 ° C
Size: Φ 18.5mm * 32mm
Warranty period: 1 year
Advantage:
1. The car logo door light is specially designed for auto modification fancier; we purpose to bring more driving fun to drivers;
2. The dazzle logo light will display on the ground when you open the car door ,and will turn off when you close the door;
3. Major Reduction in, Heat Generation;
4. High ability of shock resistant; Brighter light; Low temperature
5. Super white lighting provides a high level of road safety at night driving;
6. It can be installed in both left and right door.Courtesy door light make your car artistic moreover the atmosphere;
7. Pure color with nice appearance.
Installation Instruction
This product should be installed at the bottom of the door flame and make sure the Len vertical with the ground;
1.Pull down the inside door board first. Mark the suitable location for drilling a hole;
2.Drill the hole on the door board with our borer;
3.Inset the product from the bottom of car door ,then arrange the power cord;
4.Install the nut through the power cord upon the hole inside; Tighten the nut;
5.Connect the power cord according to the installation guide;
6.Adjust the lamp projection to the suitable place with wrench tool;
7.Reinstall the inside door board,then check the final effect
Product Image
Img 1
Img 2
Img 3
Img 4
Img 5
Send Inquiry to this Member
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,