LY-301 thickener I plant developed based on years of research and auxiliaries of the new generation of highly efficient synthetic thickener, the thickener thickening ability, modulation of good stability and penetration paste clear, printed flowers, color yield and color fastness indicators are better than other similar products, suitable for many types of fabric paint printing process, convenient and safe to use in the operation, the basic properties of the corresponding ALCOPRINT PTF. A pulp or PTE, LY-301 thickener instead will allow manufacturers to obtain significant economic benefits.
First, Quality indicators:
1, Appearance: white or light yellow viscous body
2, P H: 6 ~ 8
3, Solid content: 35 ± 2
4, Apparent viscosity: 5 ~ 20Pa.S
5, Thickening effect: the amount of 2%, and its rotational viscosity not less than 40 Pa.s, the viscosity test NDJ-1 type rotational viscometer, room temperature, the rotor 4 # 6 rev / min.
Second, Main advantages:
1, Economic benefits and social benefits significantly, if replace 100 tons A slurry just need LY-301 2 to 3 tons, costs dropped more than 2/3, save transportation cost and package storage area 97% each, and to avoid fire occurrence and improve the workshop environment.
2, Convenient modulation. In proportion the dosage to mix paste and add water, then high-speed stirring, just 2 minutes to thicken, and can be adjusted according to the paste viscosity. Colorant stability, modulated in covered containers memory for 15 days not hierarchical, not frozen, unchanged dilute.
3, Original printing process will not be affected, even improve color fastness, clear flower type outline, bright color.
4, Use with all self adhesive in any proportion.
Third, Using method:
Water first labeled as 2.0 to 4.0% of the basic paste to reserve, method is in tap water containing 1/3 of the capacity of the container (distilled water or deionized water better) was gradually added LY-301, stirred at high speed main latex inverting and then gradually add water and stir into a thick paste of uniform growth to the desired consistency is reached.
The actual production of the printing and dyeing, quantitative LY-301 with a binder and color coating directly modulation to the desired consistency of paste (1400 rev / min)
The practical reference formulation: practical application of the process, the higher requirement printing fabric combined with part of A slurry, effect will be better.
