BW Hydrogen Sulfide H2S gas detector BWClip BWC3-H
Product Description
Standard Versions: units come ready for use; complete with integral water-resistant IP 66/67 concussion-proof housing, sensor, stainless steel alligator belt clip, test cap and instructions.
| Humidity: |
5% to 95% RH (non-condensing) |
| EMI/RFI: |
Complies with EMC Directive 89/336/EEC |
| |
|
| Ingress protection: |
IP 66/67 |
| Battery: |
Lithium, non-replaceable |
| Continuously on: |
Yes |
| One-button control: |
Activation, self-test and alarm event data transmission |
| Full functional self-test: |
Verifies integrity of sensor, circuitry, battery and audible/visual alarms |
| Sensor: |
Electrochemical cell (temperature compensated) |
| Operational life: |
Three years |
| INDICATORS AND ALARMS: |
| Visual alarm: |
Flashing, wide-angled alarm lens with red quad-LEDs, plus fl ashing ALARM icon |
| Audible alarm: |
Pulsing, high-output siren at 95 dB (typical) at 1 ft. (0.3 m) |
| Vibrator alarm: |
Internal |
| Failure alarm: |
Yes (audible/visual/vibration) |
| Self-test pass: |
Yes (audible/visual/vibration) |
| Other: |
End-of-life (audible/visual/vibration) |
| CONTINUOUS LCD DISPLAY: |
Status display |
| Life remaining: |
Continuously displayed in months, then days, then hours |
| Two alarm levels: |
LOW alarm / HIGH alarm |
| Peak alarm exposure: |
Records and displays peak alarm exposure, and time elapsed (up to 24 hrs.) |
| Alarm setpoints: |
High and low (displayed on demand in ppm) |
| Self-test status: |
Advises to "TEST" and that self-test was passed "u" |
| TESTS: |
| Full function self-test: |
On activation and on demand |
| Battery: |
Every two hours (auto) |
| EVENT LOGGING: |
Records and transmits up to 10 gas alarm events |
| Event information: |
Gas type, peak exposure level (ppm or %); alarm duration in minutes and seconds; time elapsed since the alarm occurred in days, hours and minutes, life remaining, serial number, self-tests, cumulative alarm time |
| Transmission method: |
Via infrared port to infrared printer or to an IR DataLink |
| PHYSICAL SIZE: |
| Size: |
1.1 x 2.0 x 3.2 inches / 28 x 50 x 81 mm |
| Weight: |
2.7 oz. / 76 g |
Product Image
Img 1
Img 2
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
