Home > Products > Electronics & Electricity > Electronic Instrument > Automation & Control System

summary
TLX55-A type torque limiter (hereinafter referred to as the force limiter) and control system for truck crane, crawler crane, with truck crane, gantry crane, crane, cranes and required torque protection from heavy machinery.
TLX55-A force limiter to the crane operator provides a wealth of effective operation information, so that the crane in the design parameter range is effectively used. A variety of signal sensor with the instrument, the force limit device can be real-time to provide the operator with a large arm length, angle, working height, working range, rated up to the weight and the actual weight and other aspects of the information.
When the crane operation exceeds the allowable range of safety, the power limiter will issue an alarm to remind the operator to stop the illegal operation, and send out the control signal of the automatic lock to the dangerous direction movement.
2 note
The power limiter is a kind of auxiliary device which is issued to the crane operator when the crane is in the condition of the overload or the overload of the machine and the personal injury.
This auxiliary device can not replace the judgment of a good operator, the actual operation experience and in accordance with the crane safety operation procedure is still not replaced by the power limiter.
The force limiter is calibrated to provide effective information for the crane operator. In order to prevent harm to people and things, before operating the crane must make sure that the force limiter operating rate and limit parameters and settings are correct.
If the power limiter in the use of the process of failure or abnormal operation, please stop the operator immediately. The company does not assume any responsibility for the adverse consequences caused by the continued operation.
When the car body is welded, the plug of the torque limiter and the power supply must be disconnected.