HDMI OVER COAX(RG-6U/SDI) EXTENDER
INTRODUCTION
This HDMI over single Coax Extender enable the maximum HMDI signal transfer thought a single Coax cable (such as RG-6U cable) up to 120M. Also Converter accepts SD-SDI, HD-SDI and 3G-SDI signals and converts to HDMI by the Receiver box. The SDI input also has a bypass which is outputted simultaneously alongside the HDMI output allowing the SDI signal to be extended over distances up to 100M. 2 Way HDMI input selecting 2 Way SDI and HDMI output by Transmitter box.
It is equipped with HDMI (high definition multimedia interface) connector and is capable of supporting DVI (digital visual interface) equipment when used with an HDMI to DVI Adapter, providing greater flexibility and options when integrating several home theater components.
This product offers solutions for residential consumers: HDTV retail and show site, HDTV, STUB, DVD and Projector factories, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
FEATURES
l Operation at 2.970Gb/s, 2.970/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s and 270Mb/s.
l Equalized and re-clocked loop output.
l Auto video mode detection (3G/SD/HD).
l Conversion from SMPTE 425M level B to Level A for 1080p 50/59.94/60 4:2:2 10-bit
l Cascade multiple units for extending the signal longer distances.
l Simultaneous display with SDI and HDMI signal.
l Supports SDI signal distance up to 300M for SD signal, 200M for HD signal and 100M for 3G signal.
l Frequency Bandwidth 225MHz/link (HDMI 1.3).
l Supplied with a Locking PSU.
l Support HDMI video resolution up to 1080P/60Hz or 24Hz.
l Easy to install and simple to use.
SPECIFICATIONS
Video amplifier bandwidth……………….…………………………………….. 3.4 GHz Max.
Video output.......................................................................................... 1080P@24/60Hz
Color depth.......................................................................................................12 bit Max.
Input TMDS signal…....................................................................................1.2 Volts P-P
Input DDC signal…………………………………………………………..…5 Volts P-P (TTL)
HDMI input/output connector……………………………………………..HDMI type A 19Pin
Link Connector............................................................................................BNC Shielded
Power Adapter................................................................................................... DC5V/1A
Operating temperature range…………………………………………………-40℃ to +70℃
Operating humidity range………………………………... 5 to 90% RH (no condensation)
Shipping weight……………………………………………………………………..…0.93 KGS
Dimensions( L x W x H)………………………………………………….… 98.5 x 85 x 31mm
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:
l Main unit (Transmitter and Receiver).
l Remote control.
l 75Ω BNC terminator.
l 5V DC/1A Power Adapter.
l User Manual.
PANEL DESCRIPTIONS
CONNECT AND OPERATE
1. Connect the HDMI source device to the CB1 transmitter unit using the supplied HDMI cable.
2. Connect one 75Ω RG-6U Coax cable between the output port of transmitter and input port of number A receiver.
3. Connect one 75Ω RG-6U Coax cable between the cascade port of transmitter and input port of number B receiver.
4. Connect the HDTV display HDMI input port to the receiver using a HDMI cable.
5. Connect the included DC5V/1A power adapter to both the transmitter and receiver units.
6. Power on the output device first and the source second.
Remarks,
1. Please refer to connection diagram section.
2. In case of one-to-one connection, a BNC terminator must be applied on the spare BNC of RX unit.
