Product Description
Feature
The dryer is particulate material by centrifugation, shear, collision, friction, was the relative speed of the two phases of the highly dispersed state and solid-gas, enhanced heat and mass transfer, therefore it strengthens.
Dry gas into the bottom of the dryer, produces strong rotating airflow strong rushing effect on the wall of the material, to eliminate the phenomenon of sticky wall.
Coking discoloration problem in the high temperature zone of the bottom of the dryer, the heat-sensitive materials and hot surfaces in direct contact, and is equipped with a special device to solve the heat-sensitive materials.
Inside the drying chamber to the gas velocity, material residence time is short, to achieve efficient, fast, small equipment, large-scale production.
Retrofitting the upper part of the drying chamber with pottery analysis ring and swirl chip can control the particle size of the export of materials and humidity, in order to achieve the requirements of the final moisture granularity of different materials.
Working Principle
Hot air from the dryer into the bottom of the pipe with suitable atomizing speed stirring and crushing and drying chamber from the inlet, the material exerts strong shearing, blowing, rotating role, so the material by centrifugation, shear, collision, friction and micronized strengthen the heat and mass transfer. Larger wet granules corporation under the action of stirrer at the bottom of the dryer, by mechanical crushing, the low moisture content, the particle size of the smaller particles is rotationally entrained to rise, further dried during ascent. Gas-solid flow in rotating inertia of solid phase is larger than the gas phase, the larger the relative speed of the two phases of the solid-gas, and strengthen the two phases of heat and mass transfer, so it strengthens.
Overview wwwbuchangdrycom
Belt dryer, the material to be processed through an appropriate feed mechanism, such as star-shaped hopper, the swinging belt, mill or granulator, distributed on the conveyor belt, the conveyor belt through a heating unit consisting of one or several channels, each heating unit is equipped with air heating and circulation system, each channel has one or several of the dewetting system conveyor through hot air from the top down or from the next column through the material on the conveyor belt, thereby so that the material can be uniformly dry.
Use
The belt dryer is a common continuous drying equipment, and can be widely used in the chemical, food, pharmaceutical, building materials, electronics and other industries, particularly suitable for better breathable sheet, strip, drying of granular materials on the cake classes and pasty materials, but also by granulator or extruded bar mechanism forming after drying. wwwbuchangdrycom
Typical products
Dehydrated vegetables, grain feed, monosodium glutamate, chicken, coconut, organic pigments, synthetic rubber, acrylic fibers, medicines, medicinal herbs, wooden products, plastic products, electronic components aging, curing.
Belt dryer href = "http://www.buchangdry.com/view.asp?ClassLayer=48
Drying equipment http://www.buchangdry.com/view.asp?ClassLayer=52
Dryer http://www.buchangdry.com/view.asp?ClassLayer=27
Product Image
Img 1
Img 2
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
