Home > Products > Metallurgy , Mining & Energy > Metallurgy & Mining > Wire Mesh

1. The grating that the pitch between bearing bars is 30mm, is most widely used type in industrial field. Among normal types, it has the strongest resistance to surface lash.

2. The grating that the pitch between bearing bar is 40mm is the most economical and lightest type. It is the best choice for you on occasions that the clear span is small.

3. The grating that the pitch between bearing bar is 60mm and the pitch between cross bars is 50mm is developed specially for mining industry, it solves the problem of mineral splash on the plate. So it is often appointed to use in processing works, of mining industry.

4. The grating with the pitch of 30mm between bearing bars and of 76mm between corss bars is the most popular type used hone and abroad, it is proper for many applications such as walkways, platforms, etc. Series Pitch of Bearing bar Cross-bar Pitch

Specification of bearing bar load(width× Thickness) 20× 3 25× 3 32× 3 40× 3 20× 5 25× 5 1 30 100 G203/30/100 G253/30/100 G323/30/100 G403/30/100 G205/30/100 G255/30/100 50 G203/30/50 G253/30/50 G323/30/50 G403/30/50 G205/30/50 G255/30/50 2 40 100 G203/40/100 G253/40/100 G323/40/100 G403/40/100 G205/40/100 G255/40/100 50 G203/40/50 G253/40/50 G323/40/50 G403/40/50 G205/40/50 G255/40/50 3 60 50 G253/60/50 G253/60/50 G403/60/50 G205/60/50 G255/60/50 Series Pitch of Bearing bar Cross-bar Pitch Specification of bearing bar load(width× Thickness) 32× 5 40× 5 45× 5 50× 5 55× 5 60× 5 1 30 100 G325/30/100 G405/30/100 G455/30/100 G505/30/100 G555/30/100 G605/30/100 50 G325/30/50 G405/30/50 G455/30/50 G505/30/50 G555/30/50 G605/30/50 2 40 100 G325/40/100 G405/40/100 G455/40/100 G505/40/100 G555/40/100 G605/40/100 50 G325/40/50 G405/40/50 G455/40/50 G505/40/50 G555/40/50 G605/40/50 3 60 50 G325/60/50 G405/60/50 G455/60/50 G505/60/50 G555/60/50 G605/60/50