Qi Wireless Charger Charging Receiver for SAMSUNG i9300 GALAXY S3 Note II
Product Description
Free shipping 2012 Newest Portable QI Wireless Charger Charging Receiver Charging for SAMSUNG I9300 GALAXY S3 Note 2 N7100 Brand New Factory
professional supplier & good quality
Specification:
AC adapter connection method
1.Please connect the auxiliary DC connector on the exclusive AC adapter to the DC connection jack on the non-connection charging pad.
Make sure that connection is sufficiently inserted.
2.Please inset the power plug in AC adapter into the convertor Then the poewer will light up.
When the machines are connected , it will make sound like Di,which means it work well.
Installation methedod for charging type machine receriver
1. Stick the recriving coil to cell phone battery ,both contacts aimat the two reserved constacts on the phone
2.When the coil is installed ,put the phone back cover on ,put it in the charging area to charge
The charging method of charging machine
1.Lay the QI-marked charging machines in the charging area
2.The green light means it starts to charge ,you should move the charging machine in the charging area to get it recognized
3.If the product does not charge ,please try to replace the macthine on it
Product advantages
1.Once you put this QI-marked charging machine in the charging area ,it will start to charge persistently
2.This QI-marked products,fit the non-connection charging standard by the WPC.This product also can charge the charging machine which consist of QI-marked power pulg and charging machines,(There are conditions that this product does not well for some machine Please read the operation manual carefully before using it.)Qi and QI mark,are the trade marks of WPC
Transmitter:
suit for :SAMSUNG I9300 GALAXY S3 Note 2 N7100
name: wireless charger
inpuut: DC19V 1A
frequency: 100~200 kHz
wireless distance : 5mm
input: 5V
charger current: 500mA-700mAh
Receiver:
suit for :SAMSUNG I9300 GALAXY S3 Note2 N7100
name: wireless charger
frequency: 100~200 kHz
wireless distance : 5mm
input: 5V
charger current: 500mA-1000mAh
Tips for use
1.Please refer to the Operation Manual and put charging machine area.All you have to do is put in the charging area..it will atart charging regardless of the place and direction .Try to put it near the charging centre as close as possible
2.The QI mark start on the charger is the induction area ,please make sure that the induction area on the cellohones aimes at the induction area (QI mark area) on the charger. If you use our company`s T100 receiver for charging,thereceiver is the induction area
3.When the charge is almost finished but not yet,it will stop charging,this is normal
4.When the product which is under charging condition is mixed with television and radio noise ,please keep the product away from television and radio for more than 1M
5.In some mountainaous arae or othre plaes where the electric waves ara wery weak,there is condition that the charging cellphone may not be able to send or receive any message
6.The portabale telephone usually have covers outside ,those covers are so thick that it may make it impossible to charge the phone
In fact, you`d better take the phone out of the cover to charge
Product Image
Img 1
Img 2
Img 3
Img 4
Img 5
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
