Home > Products > Industrial Supplies > Rubber & Plastics Machine

WPC pelletizing machine
a)         1 set of Double-screw meter, feeding AC motor, feeding power 1.5KW, frequency control, horizontal screw feeder to make sure the continuity of feeding
b)        KS-75 double-screw extruder L/D=36:1
c)        Gear case: speed reducing system and the deploy of torque are united together. Material of gear is 20CrNi2MoA, HRC58-62. Power of cooling lubricate system's oil pump is 0.55Kw.
d)        Canister: L=290mm/section, material: 45# steel, inner hole is made of alloy lining-301 (Fe-Cr-Ni-B+ Carbide) HRC60-64. rectangle.
e)         Screw: diameter: φ72mm, made by hi-speed stell W6Mo5Cr4V2, HRC60-64, hi-impedance, the screw can be taken down and installed as the customer's requirement.
f)         Soft water circling cooling system: power of water pump: 0.55KW; vacuum system: power: 2.2KW
g)        Electric control system:
h)        1 set of main motor, power is 75KW. Frequency control
i)          Temperature meter is made of OMRON meter. There are hi-precision controlling points in every barrel's body and head.
j)          Heater: section 1 and 2 are made by copper; others are made by aluminum.
2. Granulating machine
1)        Motor power1.1KW, stepless timing
2)        Material of die hear:45steel
3. Blower device 1
1)        Fan's power:4KW
2)        The pipe is made by stainless steel
4. Transition silo
1)        capacity:500L
2)        Body of the silo is made by stainless steel
5. Blower device 2
1)        Fan's power:4KW
2)        The pipe is made by stainless steel
6. Cyclone machine
1)        capacity:500L
2)        Body of the silo is made by stainless steel