Piezoresistive OEM Pressure Sensor
Product Description
Flush Diaphragm BS12P Piezoresistive Pressure Sensor Flush diaphragm pressure sensor is a full-welded pressure sensor, it has pressure port G1/2 male or M20x1.5 male, sealing by Viton O-ring at the end of thread. The isolated diaphragm is welded in front of thread port, the whole measure range is 0～100kPa…35MPa. It can be used for food, medicine,sanitation fields in which the media is easily dirty.
Electric Performance |
Power supply | 1.5mA(typ.) |
Electric connection | Kovar pin or 100mm silicon rubber flexible wires |
Common mode voltage output | 50% of input (typ.) |
Input impedance | 2kΩ～6kΩ |
Output impedance | 2kΩ～6kΩ |
Insulation resistor | 250MΩ, 250VDC |
Overpressure | <6MPa, 2 times FS; (6~60)MPa, 1.5times FS; Differential pressure or Low pressure range 1.3times FS |
Construction | |
Diaphragm | stainless steel 316L |
Housing | stainless steel 316L |
Pin | Kovar |
O-ring | Viton |
Net weight | ~30g（general type） |
| ~50g（flush diaphragm） |
| ~150g（assembled type） |
Environment Condition |
Position | Deviate 90° from any orientation, zero change ≤0.05%FS |
Impact | 100g, 11ms |
Media compatibility | The gas or liquid which is compatible with construction material and Viton |
Basic Condition |
Media temperature | （25±1）℃ |
Environment temperature | （25±1）℃ |
Shock | 0.1g (1m/s/s) Max |
Humidity | (50%±10%）RH |
Local air pressure | （86～106）kPa |
Power supply | （1.5±0.0015）mADC |
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
