Model: | 50A |
---|---|
Brand: | GREAT |
Origin: | - |
Category: | Electronics & Electricity / Motors |
Label: | Servo Drive , Ac Servo , Drive Motor |
Price: |
-
|
Min. Order: | 1 pc |
Live Chat: | Last Online:22 Jun, 2013 |
AC servo driver (GTAS-50A) Description:
*used to driver servo motor with power capacity more than 2.5kw, but less than 5.5kw;
*Input power: 3pH AC220V, -15-+10%, 50/60Hz
*Operating temperature: 0-40deg (no freezing), bellow 80%RH (no dewing)
*Storage/delivery temperature/humidity: -40-50deg, bellow 80%RH (no dewing)
*Atmosphere environment: 86-106kPa
*Control mode: 1. Position control 2. Speed control 3. Torque control 4. JOG running
*Control input: 1. Servo ready output 2. Servo alarm output 3. Positioning finish output/speed reach to output.
*Position control: Input mode: 1. Pulse + Sign 2. CCW pulse/CW pulse 3.2pH A/B perpendicular pulse
*Electric gear: 1-32767/1-32767
*Feedback pulse: 2500 lines/rpm
*Speed control: 4 kinds of internal speed
*Acceleration function: Parameter setting 1-10000Ms/1000r/min
*Monitor function: Revolution, current position, instruction pulse accumulation, position deviation, motor torque, motor current, linear speed, rotor absolute position, instruction pulse frequency, running status, input output terminal signal etc.
*Protection function: Over-speed, over-pressure, over-current, over-loading, brake abnormal, encoder abnormal, control power abnormal, position out-of tolerance etc.
our contact website: sotengcnc com
Model |
GTAS-30A |
GTAS-50A |
|
Input power |
3-phase AC220V -15%--+10% 50/60Hz |
||
Environment |
temperature |
Work: 0--40° C storage: -40° C--50° C |
|
Humidity |
40%--80%(no dewing) |
||
atmospheric pressure |
86--106kPa |
||
Control method |
Position control |
||
Regenerative brake |
Built-in |
||
Characteristic |
Speed frequency response |
≥ 250Hz |
|
Speed fluctuation rate |
< ± 0.03( load 0--100%); < ± 0.02(power supply -15%--+10%) |
||
Timing ratio |
1: 5000 |
||
Pulse frequency |
≤ 500kHz |
||
|
1)Servo enable 2)alarm clearance 3)CCW servo inhibit 4)CW servo inhibit 5)Deviation counter zero/speed selection 1/zero speed clamping 6) instruction pulse inhibit/speed selection 2 7)CCW torque limit 8)CW torque limit |
||
Control output |
1) servo ready output 2)servo alarm output 3)positioning completing output/speed in-position output 4)mechanical brake output |
||
Position control |
Input method |
1)pulse+sign 2)CCW pulse/CW pulse 3)2-phase A/B orthogonal pulse |
|
Electrical gear |
1-32767/1-32767 |
||
Feedback pulse |
2500line/rev |
||
Speed control |
4 kinds of internal speed |
||
Acceleration function |
Parameter setting: 1-10000ms / 1000r/min |
||
Monitor function |
Speed, current position, instruction pulse accumulation, position deviation, motor torque, motor current, linear speed, rotor absolute position, instruction pulse frequency, running state, input/output terminal signal and so on. |
||
Protection function |
Overspeed, overvoltage/undervoltage of main power supply, overcurrent, overload, brake abnormity, encoder abnormity, control power supply abnormity, position out-of-toleration |
||
Load inertia |
Less than 5 times of motor inertia |