Home > Products > Consumer Electronics & Lighting > Lighting > LED Lighting

A microwave LED lighting in which electrons generated from a heated cathode are affected by magnetic and electric fields in such a way

Microwave sensor switch is a new type automatic switch that comes after voice and infrared sensor switch.

The advantages compared with others sensor LED light as follows
1. Non-contact detection
2. Suitable for bad environment immune to temperature, humidity, noise, air, dust, light^
3. RF interference ability
4. Transmission power only 0.2M/W, not harm for human body
Simple installation with easy wiring

1) Product Features
A) Auto switch on/off and dimming
B) Built-in microwave sensor and light sensor
C) Integration & Easy installation
D) 80% Energy-saving than common LED lamp
E) 3-year warranty, RoHS and CE
2) Basic parameter
Input voltage: 100-240VAC Input power: 8W± 10%       
Input current: 0.08A- 0.035A    Frequency: 50/60Hz
CCT/Lums: 3000K/(950LM± 10%) CCT/Lums: 4300K/(950LM± 10%)
CCT/Lums: 6000K/(950LM± 10%)         CIR: ≥ 80
Power Factor: ≥ 0.9    Material: PC + Al
Size: 26mm(Φ)*1200mm(L)    Storage Temp.: -20~60
Working Temp.: -10~40 Working Humidity: 20%~85%

3)Induction parameter
Dimming rating: 20% lm
Light sensor: 10 lux
Time Interval: 10S, 100% lm; 30S, 20% lm
HF system: 5.8GHz ISM wave band
Transmission power: < 1mW
Sensor angle: 360&deg;
Standby power: < 1.5W
Installation height: 2.5-4M

Custom-made: Detection radii., dimming rating, light sensor and time interval.
4) Key Function
Auto switch on/off:
With motion sensor technology, the lamp will auto switch on/off according to the movement and environment illuminance in the detection area.
A) When environment illuminance is more 10lux, the lamp is switch off. Even if there has movement in the detection area.
B) When environment illuminance is less 10lux, the case is as below:
A) There has movement in detection area, the lamp is switch on.
B) There hasn't movement in detection area, the lamp is switch off.

Auto dimming
When lamp start to work and there has no movement in the detection area,
A) lamp will be kept 100% luminace within 10s,
B) Lamp will automatically fall 20% lumious

Light sensor
Auto identify the environment illumination whether it is more or less 10Lux.
Confirm it whether lamp need auto switch on/off when there has movement
In the detection area.
A) when it is more 10 lux, lamp will automatically switch off.
B) when it is less 10 lux, lamp will automatically switch on.
5) Work mode

A) Initialization
Lamp will enter initialization stage when connects with power. It light 10sec and off.
After initialization, work automatically as above description of function.

Notice:
A) Mounting separate distance: The distance between lamps should be not less than 3m.
B)Recommended mounting height: 2.5~4 M.
8) Warning
A) The LED in serial can function when all the seals installed in place.
B) Please don't remove or connect with other lamp when powered on.
C) When the LEDs in serial are damaged, you need experienced technician
To repair using the same rating LEDs.
D) Please confirm with profession installation.
E) Please cut off power supply before installation and removal operations.
F) Make sure that you have cut off the power for safety purposes.
G) Improper operation caused losses, the manufacturer does not undertake any responsibility.