|
Model No.
|
AT88F
|
|
Rating Voltage
|
DC12V input （with an adapter）
|
|
Power consumption
|
10W
|
|
Dimensions
|
17*17*25cm
|
|
Negative ions output
|
6x 106 /cm3
|
|
OzoneOutput
|
100-200mg/h (30mins auto stop)
|
|
Effective Area
|
80-140 m2
|
|
Ozone Discharge Style
|
Imported Enamel Tube
|
|
Filter
|
low-temperature, catalyst and activated carbon
|
|
Gross Weight
|
950 g
|
|
Certificate
|
CE
|
Working Principle
AT88F takes advantage of negative ion+ ozone+ low-temperature catalyst and activated carbon filter. Highly energetic Ions irradiated by Ionization generating device react with volatile organic gas molecules VOC in the air, make VOC broken down into carbon dioxide and water, it also works on HzS and NHa.
As negative ions drift, pollutants such as dust, pollen, cigarette smoke and even vapourised substances like aerosol propellants and car fumes are attracted to and cluster around the ions. This has the effect of making the ion grow in size. There comes a point where it is too heavy to be carried in the air, so it falls to the ground, then naturally the air in the room is fresher.
With Imported Enamel plate, Oxygen molecules (O1 and O2) are converted to ozone (O3) by a high-voltage electrical charge, One oxygen atom (O1) splits off from the ozone molecule, and reacts with other particles when it comes within range of a particle and/or pollutant. Ozone is highly reactive, As a result, the particle will no longer be toxic, and will no longer be able to reproduce if it is biological. Therefore, it kills bacteria and odor effectively, keep air fresh.
Installation
1. Connect the unit to an adapter with electricity input, press the round button, the blue light turns up, which shows the ionization and fan start working.
2. When press the fan-shaped button, the red light also turns up, which shows the ozonator starts working at the same time, and it keeps for 30 mins after that, the ozonator automatically stops, leaving ionization and fan working alone.
3. The ozonator can be restarted whenever you need it. Just press the fan-shaped button.
Maintenance
To maintain optimal functionality, the carbon filter should be cleaned every month.
Cleaning Filter:
Rotate anti clockwise the filter cover, take the cover out, remove the filter clean, then place and close.
Notes:
• This unit can not be operated without proper installed.
• Inside the unit does not contain cell parts that end-user could fix, so please do not disassemble it by yourself.
Package Information
Individual packing size: 170 x170 x 245 mm / pcs (G.W:600g)
Carton Size: 75cm(W) x 47cm(H) x55cm(D)
GW/NW of Carton: 24.5 / 22kgs
QTY per Carton: 20 pcs/ctn
