Equipment characteristic:
1) The machine is designed according to the small section hollow profile; it had the features of steadily to operate and marked energy saving effect.
2) The efficiency press length is 4 meters, it is suitable for the producing of hollow profile with thin-wall.
3) The chain guide rail is UHMWPE, and the rail had strong wearability, it can prevent the products from polluting.
4) The whole open-shut model traction frame can effectively assure the traction force and the products with the same direction and it is convenience to adjust.
5) The main electricity components are imported, they have high sensitivity and low failure rate.
6) The inverter is imported from Japan, Mitsubishi PLC is adopted in speed adjustment of the pulling device, realizing infinite speed variation.
Technical parameter:
Total power: 21.8KW 380v/50Hz
Operating environmental temperature: 5~40℃
Relative humidity: ≤80%
Operating air pressure: 0.4~0.6Mpa
Air consumption: ＜20 l/min
1. Fiberglass creel: 2000mm×600mm×2000mm 2 sets
2. Resin bath: 1 set
3. Shaping platform:
Shaping mounting plate: 800×600mm
temperature control zone: 4 zones
power 11.8KW
dimension ≈4500×1250×1750mm
4. Haul-off machine: 1 set
max size of traction clamping window 215mm(width)×110mm(height)
max traction force 40KN
traction speed 0.1-1.0m/min
max clamping force of drawing head 40KN
power 1.5kw 380V/50HZ
dimension 4500mm×1000mm×1900mm
p.s. There is an polyurethane insulation panel setting in the machine, with solidity 780
5. Automated cutting machine: 1 set
max cutting range 500mm(width)X90mm(height)
speed of cutting saw blade 2850r/min
cutting power 2.2KW
dedusting method cleaner/1.5KW
diameter of saw blade φ500mm/φ50mm(inner bore)
cutting way Manu/Auto
cutting tracking journey 700mm
dimension ≈2600mmX1700mmX1750mm
6. Products piling bin 1 set (6m)
