80W UFO LED high bay light
【1】Product Appearance
(1)This lamp has good heat conduction property, and the impact strength of light compliant to anti-explosion standard.
(2)Using high power COB LEDS, the lamp’s luminous efficiency can reach 80-100LM/W, and CRI>80Ra.
(3)Fins heating dissipation design enables the LED Tj within 85℃, and power up to 200W, lifespan more than 35,000 hours
(4)This lamp is waterproff and dustproof, with protecting rate:IP65 and use MEAN WELL driver with input voltage100~240VAC.
【2】Shape Structure
Shell Material：Aluminum Alloy Shell Color：Silver white
Net Weight：8.3Kg Unit：mm ±2mm
【3】 Parameters
|
Input Voltage
|
AC100～240V
|
Color Rendering Index
|
Ra＞80
|
|
Frequency Range
|
50～60Hz
|
Beam Angle
|
100°
|
|
Power Factor
|
>0.97
|
LED Reduction Rate
|
1～3% / 1,000Hrs
|
|
Power Efficiency
|
>90%
|
Color Temperature
|
2700～7000K
|
|
LED Working Voltage
|
DC29～33V
|
Working Temperature
|
-20℃～+45℃
|
|
Total Power
|
88W
|
IP Grade
|
IP65
|
|
Luminous Efficiency
|
80～100lm / W
|
Working Life-span
|
>35000H
|
|
Power line
|
VDE 3×1.5mm2
|
【4】Luminous flux reduction diagram
(1)The data above was testing at environment temperature of 25 celsius degree after 1000 hours constant lighting.
(2)The environment condition will affects luminous flux reduction. Luminous flux will drops faster at a higher temprature or a longer lighting time.
【5】Photomatric Data
【6】 Illumination Distance/illuminance/Irradiated Area
【7】Packing specification
Body（L）412×(W)312×(H)428mm 1PC/CTN 10Kg
Reflector（L）432×(W)432×(H)534mm 10PCS/CTN 4.5Kg
【8】Using and installation instructions
Installation Procedures
(1)Please firstly install the reflector properly on the heat sink, and screw down.
(2)Then screw down the hoop into the top cap.
(3) Hang the body lamp on the installation site.
(4) Please hang the chaining steel wire on another installation device.
(5) Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.
(7) The male waterproof joint equiped with 1.0 meter cable.
(8) The female waterproof joint can be connected to the input end of lamp while producing.
(9) Except normal wire connecting, this UFP-LIGHT can equiped with such male and female waterproof joints for easy installation and maintenance.
Attentions：
(1)A licensed electrician must undertake this installation. Please check the lamp carefully before installation.
(2)Please follow up the installation procedures, make sure the screws been wrested very tightly, the wires been connected properly, as attached installation instruction.
(3)The waterproof joint is only a choice for easy installation and maintenance, not standard come with lamps.
