Home > Products > Security & Protection > Access Control System

Features and functions:
1. Fault detection and alarm functions, easy to use and maintenance.
2. The running status can be programmed and controlled with the built-in keyboard on the main board.
3. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribed time and reset again after the default delay (till fully reset).
4. Anti-breakthrough function. The gate is locked automatically until opening signal received.
5. Synchronization functions (for dual gate equipments).
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds), the system will cancel the authority of the current user automatically.
7. Gate can be set as normally open or normally closed.
8. Interfaces for variety of card readers: IC / ID card readers, bar codes, fingerprints, etc.
9. Direction can be set as single-direction or bi-direction.
10. LED direction indicator.
11. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
13. Counter function (optional).
14. Support infrared photocell for anti-pinch and reset function (optional).

Technical Specification:
Voltage: AC 220V/110V± 10%
Frequency: 50/60Hz
Current: 3A
Control circuit: DC24V
Power consumption: 40W
Input interface: 12V level signal or 12V pulse signal with pulse width >100ms, or driving current >10mA
Working temperature: -20° C~60° C
Working humidity: 0~95%RH
Maximum passage width: 1200mm
Time of opening or closing: 2.5 seconds