Technical Parameters of Z Purlin Steel Roll Forming Machine:
1. Flow Chart of Z Purlin Steel Roll Forming Machine:
Uncoiler---Feeding Guide---Levelling---Punching---Feeding Guide---Roll Forming Machine---Cutting---Run-out Table
2. Components of Z Purlin Steel Roll Forming Machine:
2.1 Simple Uncoiler (Manual)
2.2 Roll Forming Machine
2.3 PLC Controlling Box
2.4 Hydraulic Station
2.5 Run-out Table
3. Main Technical Parameters of Z Purlin Steel Roll Forming Machine:
3.1 Thickness of Material: 2.5mm Galvanized Steel Coil
3.2 Rolling Stations: 18 Stations
3.3 Diameter of Roller: Φ 80mm
3.4 Roller applied to Bearing Steel Quenched
3.5 Forming Speed: 6-10m/min
3.6 Transmission: L. 5" Chain Transmission
3.7 Motor Power: 15KW
3.8 Dimension of Section Roll Forming Machine: 13m X 1.5m X 1.3m
3.9 Electronic Controlling System: Panasonic PLC
3.10 Total Weight: 12 tons
3.11 Hydraulic Cutting
3.11.1 Hydraulic Station Power: 11kw
3.11.2 Hydraulic Pressure: 20Mpa
3.11.3 Hydraulic Blade Material: Cr 12
3.11.4 Cutting Length Error: ± 2mm
3.11.5 Punching Mould: Punching Head 4PCS
4. Quality Requirements for Z Purlin Steel Roll Forming Machine:
4.1 Thickness of Chrome on Roller: 0.05mm
4.2 Productions According to National Standard: GB/Tl2755_91;
4.3 Production is plate and without scratch
