Home > Products > Industrial Supplies > Other Industrial Supplies

• In accordance with ATEX 100a, Directive
94/9/EC for Category 2 ATEX Zone 1 (Gas)
and ATEX Zones 21 (Dust) potentially explosive
atmospheres, for non-electrical equipment.
• All Stainless Steel AISI 304 construction
(except cart).
• For dry recovery only.
• This unit is designed for applications where
fi nely pulverized dust is to be recovered.
• Optional conductive polyliners and depressor
kit are available for the safe disposal of
recovered material.
• Detachable recovery tank with a capacity
of
25 litres for easy emptying of recovered
materials.
• The fi ltration system consists of a static dissipating
main fi lter and an extra large static
dissipating pre-fi lter.

Performance chart
SS-20L-DT-MFS_CE_En/REV 3/23 APR 2009
Included tools and accessories Ø38mm (1 ½”)
1 381400A Kanafl ex suction hose, SD*, Ø38mm x 3m for 38mm camlock inlet.
2 381364A Wand Assembly with aluminum attachment, 2 pcs, stainless steel
3 381236 Universal Tool Assembly, SD*, 46cm, aluminum with conductive brushes & rubber blades.
4 381372D Crevice Tool, 28cm, stainless steel
5 381185DA Dusting Brush, with conductive brush, Ø13cm, aluminum with stainless steel adaptor.
6 383462D Conical Nozzle with curved tip, 25cm, conductive rubber with stainless steel adaptor.
7 211030 Air supply jose, SD*, Ø12.7mm X 15m with quick disconnect fi ttings (not shown)
*SD: Static Dissipative and Conductive
WARNING!
Only tools and accessories provided by Tiger-Vac shall be used with this vacuum cleaner. Any other tools
used will render the warranty null and void any may cause an explosion which could result in bodily harm.
Tiger-Vac will not assume any responsibility for damage that may occur due to the improper use or handling
of the vacuum cleaner system.
MANUAL FILTER SHAKER SYSTEM (MFS)
• The fi lter shaker system consists of a spring action mechanism operating directly onto the fi lter cage located
inside of the fi lter chamber. The system is operated by pressing on the ergonomic handle located on
the side of the fi lter chamber.
• The Manual Filter Shaker dislodges the accumulated caked-on dust from the fi lter thus improving the
fi lter’s performance.
• A dralon pre-fi lter for very fi ne dust is included with the MFS fi ltration system.
• The fi lter, along with the fi lter cage, can be easily removed from the fi lter chamber and washed with lukewarm
water and mild detergents.
• HEPA Filter 99.995% @ 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN1822. Or
ULPA fi lter 99.999% @ 0.12 micron. Filtration Effi ciency of 99.9995% @ 0.18 micron. Tested: IEST RPCC001.3.
U15 by MPPS method as per EN1822.
Compressor
size Airjet Air line size Input Air
pressure/bar
Suction
intake Ø Vacuum H2O Airfl ow
30 hp 6mm 12.7mm
(0.5”) 80PSI/5.5 38mm (1.5”) 4320mm H2O
(170” H2O)
110CFM/
52 l/s
30 hp 6mm 12.7mm
(0.5”) 100PSI/6.9 38mm (1.5”) 5080mm H2O
(200” H2O)
95CFM/
45 l/s
Dimensions: L x W x H. Noise level : 72dB(A) at 2m (6.6’) from the Venturi system