| Model: | HHPHE |
|---|---|
| Brand: | HongCe |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Electronic Instrument / Automation & Control System |
| Label: | leak detection equip , nitrogen leak test , leak test procedure |
| Price: |
-
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:01 Aug, 2019 |
HVAC Plate Heat Exchangers Helium Leak Testing System
The automatic helium leak test system is suitable for the detection of the airtightness of the plate- heat exchanger, which is helpful for many industrial applications such as petroleum industry, papermaking, power generation, textile, HVAC, metallurgy, organic chemistry and automobile.
The system adopts duplex structure, places the workpiece in the inner leak testing station to process inner leak detection firstly, and then push the product to outer leak testing station through the transmission line to process detection. For the three-cavity workpiece, during the inner leak testing cycle, the system fill helium into A cavity for detecting the leakage between A- B and A – C. And during the outer leak detection cycle, the system can detect the leakage of the cavities. This system comes with helium recovery device, can save the cost of helium effectively.
Technical Parameters：
|
Workpiece |
Plate Heat Exchanger |
|
Leak testing station |
Two Stations: one is for workpiece strength and inner leak test ,the other is for outer leak test |
|
Size of testing chamber |
850*750*400mm Can be installed a large workpiece (620 * 500 * 250mm) or 2 small workpieces (320*100*77mm) |
|
Gas for Gross Leak Test |
Nitrogen |
|
Nitrogen leakage pressure |
5.5MPa |
|
Gas for Fine leak test |
100% Helium |
|
Helium leakage pressure |
5.0MPa |
|
Reject point |
5.0E-7Pa.m3/sec. |
|
Cycle time |
It takes 8 hours to check 480 small workpieces or 240 large workpieces |
|
Helium recovery rate |
≥98% |
