| Model: | LP-200X200-Dim |
|---|---|
| Brand: | RedSun |
| Origin: | Made In China |
| Category: | Consumer Electronics & Lighting / Lighting / LED Lighting |
| Label: | LED Light Panel , LED Panel Light , LED panel |
| Price: |
US $27.2
/ pc
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:19 Mar, 2013 |
LED Dimmable Light Panel 200x200
Body size: 200x200x18mm; Light Area Size (mm): 198x198mm
Input voltage: 110-220VAC
Power Supply: External; Consumption Watts: 14W; Current: 350mA
LED type: Taiwan SMD; LED quantity: 144pcs
Working Temperature:-10℃-40℃; IP Class: IP20
Warm White: 3000K, 780lm; Natural White: 4200K, 780lm; Cold White: 6000K, 830lm
Packing: 10pcs/ctn, G.W.: 17.0kgs, carton size: 57.5*26.5*36cm
Warranty: 24 months
1). Energy saved up to 50%, high intensity
2). Instant start, no flickering, no humming
3). Exquisite die-casting tech, ultra thin design
4). Triac dimmable driver makes panel light varies from 10-100% brightness synchronized.
5). Special circuit deisgn, each LED can work separately thus it can avoid the influence that a broken LED causes
6). It adopts super bright LED as its luminous body.The anodized aluminum frame is stylish and fashionable with everlasting color. It's powered by low voltage constant current driver, which is safety, energy saving and long life. Matched with related triac dimmer switch, the light can be dimmable.
7). No electric wave, no such hazard that mercury or lead enters he enviroment, no RF interference.
8). Four sides illumininating design makes it high lumen output.
9). Excellent thermal management can effectively guarantee the LED's long-term stability. The front panel board is high translucent acrylic, which ensures the light even, soft and high transmittance.Instant start, no flickering, and no humming, no hazardous materials
10).The installation is very easy, it can insert into the ceiling directly, and it also can be hanging down by using the lifting hole on the back.
Installation:
1. Drill a square mounting hole on ceiling according to size requirement from manual.
2. Turn off the power.
3. Connect the commercial power with the input of the matched power supply, make sure
that no copperware exposed. (Dimmer switch should be connected to the L line in the
power supply as the below diagram.)
4. Fix the panel light and dimmable power supply at suitable place.
5. Make sure it is connected well between the power supply DC output and light fixture
DC input.
6. Pinch both springs, then push light into installation hole. Make sure the light fixed well.
7. Turn on the power.
Application:
Hotel, Meeting Room, Office, Hospital, School and places where energy saves and high color rendering index lighting needed.
Notes
The panel should be driven by appointed power supply.
Protection film should be removed after installation to keep the panel clean.
To avoid electric shock, keep power off before installation and maintenance
Installation and maintenance must be done by profession electrician, the non-professional operators are not allowed to take apart the lights.| Payment Terms: | Western Union / T/T in Advance |
|---|---|
